3M™ - General Trim Adhesive:

Low VOC, clear, high strength adhesive for bonding automotive materials such as carpeting, jute pads, fabrics and plastics to metal and other surfaces. Has good heat and water resistance. Not recommended for bonding polystyrene foam. Use 3M™ Spray Trim Adhesive, part number 8074, for bonding polystyrene.

• Lace spray pattern and controlled spray width
• High strength performance
• High heat resistance
• Good soak in control, minimizing possibility of bleed through

3M™ - Super Trim Adhesive:

Aerosol contact adhesive designed for bonding vinyl tops, heavyweight liners and hood silencer pads where high strength and heat resistance are needed.

• Fast-acting, high-strength, aerosol contact adhesive
• Resistant to heat and plasticizing oils
• Exellent for attaching vinyl, insulation, foam, padding and rubber parts to metal and other surfaces

3M™ - Super 77 Multipurpose Adhesive Aerosol:

Spray adhesive for light duty maintenance. 3M™ Super 77™ Multipurpose Adhesive bonds aggressively to plastics, foils, papers, flexible foam, fabric, light gauge metal and cardboard. Low soak-in provides a secure long-lasting bond.

• Versatile. Works with a variety of substrates on a variety of surfaces.
• Great value. One 24 fl. oz. aerosol can give you 220 square feet of coverage.
• Contains no methyl chloroform or chlorofluorocarbons.
• Easy to use. Simply spray on the surface.

FUSOR™ - Plastic Surface Modifier, 9 oz:

Applications: Increases adhesion to all plastic bumpers. Improves adhesion of paints to plastic surfaces.

Substrates: All plastic bumper covers.

Features and Benefits:

• Open time from 10 minutes to 24 hours
• California compliant
• When used with 142 and 152, no need for plastic identification

3M™ - Woodgrain and Stripe Adhesive Remover:

Cleans off adhesive residue after woodgrain vinyl or vinyl stripes have been removed. Fast-acting remover can be used on all acrylic enamel painted metal surfaces.

3M™ - General Purpose Adhesive Cleaner:

Specially blended solvent for removal of light paint overspray, adhesive residue, wax, grease, tree sap, dirt, road tar, oil and bugs in aerosol form.

Will not harm most thoroughly cured automotive paint, vinyls, or fabrics when properly used. Part numbers 08984 and 08986 have a VOC content of 816 grams per liter (6.8 lbs per gallon). Composite Partial Pressure equals 4.81 mmHg. Part number 08987 Aerosol has a VOC content of 738 grams per liter (6.16 lbs per gallon). Local air quality regulations may regulate or prohibit the use of surface preparation and cleanup materials based on VOC content. Consult your local air quality regulations.