Brand Index:
Tool Index:
Resources:
SHIPPING DISCOUNT
on qualifying orders
Click here for more information
NO HAZMAT fees
on Ground shipments!
| Cart Total |
|
|
| Subtotal: |
$0.00 |
| Tax: |
$0.00 |
| Total: |
$0.00 |
|
View Cart |
|
|
|
|
|
 |
 BODY AND FENDER REPAIR TOOLS
BODY HAMMERS
| Type |
Image |
Description |
Wood
Handles |
Fiberglass
Handles |
DINGING
HAMMER |
 |
For fender and high-crowned panel dinging or
bumping. Both high and low-crown faces for “on
or off dolly” work. Faces, 11⁄4″ and 19⁄16″. Round
heads, 6″ overall. Weight 1.04 lbs. |
150G |
150FG |
DINGING
HAMMER |
 |
For light dinging and long reach. Square face permits
dinging close to molding or beading. Faces, 11⁄4″
round, 11⁄16″ square head 6″ overall. Weight .85 lbs. |
151G |
— |
HIGH
CROWN
CROSS
PEEN HAMMER |
 |
Two high-crowned faces for concave surfaces on
doors, rear quarter panels, fenders and hoods.
Faces 11⁄8″, 6″ overall. Weight 1.02 lbs. |
152G |
— |
CROSS
CHISEL
HAMMER |
 |
Excellent for finishing. Cross peen used for working
in sharp corners around moldings and for caulking.
Round face — 19⁄16″ diameter. Chisel — 3″ long.
Weight .87 lbs. |
153G |
153FG |
CURVED
CROSS CHISEL
HAMMER |
 |
Excellent for finishing. Cross peen used for working
in sharp corners around moldings and for caulking.
Well balanced curved chisel for work in close places.
Round face — 19⁄16″ diameter. Chisel — 3″ long.
Weight .85 lbs. |
153GB |
153FGB |
CROSS CHISEL
SHRINKING
HAMMER |
 |
Cross grooved. Extra wide faces are cross grooved
and used for shrinkage on large surfaces — chisel
end used on sharp corners. Flat round face — 19⁄16″
diameter. Chisel — 3″ long. Weight .87 lbs. |
153S |
— |
BENT
VERTICAL CHISEL
HAMMER |
 |
Excellent for finishing. Vertical chisel is bent for working
in sharp corners, around moldings and for caulking.
Round face — 11⁄2″ diameter. 5⁄8″ Chisel — 51⁄2″
long. Weight .85 lbs. |
154G |
154FG |
VERTICAL CHISEL
SHRINKING
HAMMER |
No Image Available |
Cross grooved. Extra wide faces are cross grooved
and used for shrinkage on large surfaces — vertical
chisel end used on sharp corners. Round face —
11⁄2″ diameter. Chisel — 51⁄2″ long. Weight .87 lbs. |
154S |
154SFG |
FENDER
BUMPER |
 |
For bumping where hand and dolly cannot reach.
Ample clearance for obstructions. Also used as a
caulking iron. Length of head, 83⁄4″. Weight 2.8 lbs. |
155G |
155FG |
PICK
HAMMER |
 |
Long-reach, thin point for low spot on low-crown
panels. Reaches over inner obstructions. Face, 11⁄4″
round point, 1⁄32″ radius. Length of pointed end,
51⁄2″. Weight .91 lbs. |
156G |
156FG |
CURVED
PICK
HAMMER |
 |
Like 156G except pick end is bent in arc of normal
blow. Reaches behind reinforcements to difficult
spots. Face, 11⁄4″ round point, 1⁄32″ radius. Length
of pointed end, 51⁄2″. Weight .86 lbs. |
156GB |
— |
GENERAL
PURPOSE
PICK
HAMMER |
 |
Medium size point and reach for general work. Low
crown strawberry point for perfect balance. Face,
19⁄16″ round point, 3⁄32″ radius. Length of pick end,
33⁄4″. Weight .91 lbs. |
158G |
158FG |
ROUND
POINT
FINISHING
HAMMER |
 |
Blunt point — long reach. For low spots on high
crown panels and other work with long reach. Will not
pick holes in the metal. Round face — 19⁄16″ diameter.
Blunt point 3″ long. Weight .81 lbs. |
158GM |
158FGM |
SHARP
POINT
FINISHING
HAMMER |
 |
Sharp point — long reach. For low spots on high
crown panels and other work with long reach. Round
face — 19⁄16″ diameter. Sharp point 3″ long. Weight
.79 lbs. |
158GMS |
— |
HEAVY DUTY
BUMPING
HAMMER |
 |
For heavy gauge truck fenders and panels. Also used
in straightening reinforcements, braces, etc. Faces,
11⁄4″ round and 13⁄16″ square head, 4″ overall. Weight
1.1 lbs. |
160G |
160FG |
DINGING
HAMMER |
 |
Short-reach, lightweight. One low-crown, square
face. Lightest dinging hammer in line. Faces, 11⁄4″
round and 13⁄16″ square. Head, 4″ overall. Weight
.83 lbs. |
161G |
161FG |
SHRINKING
HAMMER |
 |
For work in close quarters. Expertly machined
serrations on the round face. Plain square face,
11⁄8″. Round serrated face, 11⁄4″. Diameter 4″ overall.
Weight .78 lbs. |
162G |
162FG |
UTILITY
PICK
HAMMER |
 |
Blunt point, short reach. For low spots in high-crown
panels and other work with small clearance. Face,
19⁄16″ round point, 5⁄32″ radius. Length of pointed
end, 2″ head, 4″ overall. Weight .75 lbs. |
164G |
164FG |
PICK
HAMMER |
 |
Lightweight. Provides stubby pick point and highcrown
peen-type faces. Will ding out small dents in
high fins. No need to remove panels. Long reach,
18″ handle. Weight 5 oz. |
165G |
— |
PICK
HAMMER |
 |
Lightweight. Provides stubby pick point and highcrown
peen-type faces. Will ding out small dents in
high fins. No need to remove panels. 12″ handle.
Weight 4 oz. |
166G |
— |
CROSS PEEN
FINISHING
HAMMER |
 |
Used to bump odd fender or bumper contours.
Round face — 19⁄16″ diameter. Peen end 3⁄16 × 7⁄8″. 5″
overall head length. 12″ handle. Weight .91 lbs. |
168G |
168FG |
HIGH CROWN
CROSS PEEN
FINISHING
HAMMER |
 |
Ideal for forming radiuses, contours and curves
– restoration, bike tank. High Crown face — 19⁄8″
dia meter, 21⁄4″ radius. Peen end 3⁄16″ × 1″. 5″ overall
head length. 12″ handle. Weight 1.0 lbs |
168HC |
168HCFG |
LARGE FACE
PICK
FINISHING
HAMMER |
 |
For finishing and caulking. Round face — 17⁄8″
diameter. 41⁄2″ overall head length. 12″ handle.
Weight 1.0 lbs. |
169G |
169FG |
DOOR
SKIN
HAMMER |
 |
For high crown work and finishing, without poking
holes in thin sections. 61⁄2″ overall length. 12″
handle. Weight .94 lbs. |
170G |
170FG |
BODY HAMMERS & BODY PICKS
| Type |
|
Head
Weight |
Overall
Length |
Head
Length (A) |
Head
Width (B) |
Face
Width (C) |
Replacement
Handle |
Part
No. |
TINNERS
RIVETING
HAMMERS |
 |
Octagonal head with flat striking face and rounded cross peen.
For driving & setting rivets and general sheet metal forming. |
| 4 oz. |
9 1⁄4″ |
3 11⁄16″ |
9⁄16″ |
15⁄16″ |
HH50 |
25G |
| 8 oz. |
11 |
4 1⁄4″ |
3⁄4″ |
21⁄32″ |
HH53 |
26G |
| 12 oz. |
13 1⁄2″ |
4 3⁄4″ |
29⁄32″ |
25⁄32″ |
HH801 |
27G |
| 1 lb. |
14 |
5 1⁄8″ |
31⁄32″ |
27⁄32″ |
HH801 |
28G |
FIBERGLASS
REPLACEMENT
HAMMER
HANDLES |
 |
1 lb. and 11⁄4 lb. Ballpeen - G Series 13″ Length |
HH105106FG |
| 1 1⁄2 lb. Ball Peen - G Series 14″ Length |
HH107FG |
2 lb. Ball Peen - G Series 16″ Length &
155FG Fender Bumper |
HH108FG |
| 2 1⁄2 lb. and 3 lb. Ball Peen - G Series 16″ Length |
HH109110FG |
| 1 1⁄2 lb. Brick Hammer 12 1⁄2″ Length |
HH173FG |
| All Body Hammers with 12” Handle Length |
HHBFFG |
HICKORY
REPLACEMENT
HAMMER
HANDLES |
 |
Hickory Handle for 155G Fender Bumper |
HH45 |
| Hickory Handle for 165G Pick Hammer |
HH42A18 |
| Hickory Handle for all other Body Hammers |
HH42B |
PICKS
| Type |
|
Description |
Part No. |
MEDIUM
CURVED
PICK |
 |
Medium length. Curved and pointed. Use
twisting or prying action. Length 261⁄2″.
Weight 2.2 lbs. |
1106 |
LONG
CURVED
PICK |
 |
Long length. Curved and pointed. Use
twisting or prying action. Length 31″.
Weight 2.5 lbs. |
1107 |
LONG
CHISEL
BIT PICK |
 |
Heavy duty. Employ twisting action. Chisel
bit 1″. Length 20″. Weight 1.9 lbs. |
1109 |
SHORT
CURVED
PICK |
 |
Extremely short length. Curved and pointed.
Use twisting or prying action. Length
12″. Weight .5 lbs. |
1110 |
MEDIUM
SHORT
CURVED
PICK |
 |
Short length. Curved and pointed. Use
twisting or prying action. Length 18″.
Weight .7 lbs. |
1111 |
LIGHT
CHISEL
BIT PICK |
 |
Light duty. Employ twisting action. Chisel
bit 11⁄16″. Length 16″. Weight .7 lbs. |
1112 |
BODY & FENDER REPAIR TOOLS:
DOLLY BLOCKS
| Type |
|
Description |
Part No. |
LIGHT WEIGHT
TOE DOLLY |
 |
Designed for flat surfaces. All the features of a
toe dolly.
Sizes 43⁄4″ × 21⁄4″ × 11⁄16″. Weight 1.8 lbs. |
1057 |
TOE
DOLLY |
 |
Thinness and length provide easy accessibility
to narrow pockets. Large, flat face is frequently
used in shrinking and dinging flat panels. The
flat sides furnish a convenient anvil for repairing
flanges. Sizes 43⁄4″ × 23⁄8″ × 11⁄8″. Weight 3.0 lbs. |
1058 |
SHRINKING
DOLLY
(SERRATED) |
 |
Shaped like a toe dolly but has one face
covered with raised serrations for shrinking
metal stretched by dents. Weight 3.4 lbs. |
1058S |
HEEL
DOLLY |
 |
Design makes it possible to reach easily into
sharp corners and wide radii. These features are
exclusive to the Heel Dolly and continue its high
demand.
Sizes 31⁄4″ × 21⁄2″ × 17⁄16″. Weight 2.7 lbs. |
1059 |
GENERAL
PURPOSE
DOLLY |
 |
Provides convenient and comfortable hand
hold during heaviest blows. Weight, balance
and several differently crowned working faces,
together with two beading and flange lips, give
this dolly broad general use.
Sizes 27⁄8″ × 23⁄8″ × 21⁄4″. Weight 3 lbs. |
1060 |
UTILITY
DOLLY |
 |
High-crown dolly with one narrow beading edge.
Thick rounded sides are useful in short radii
curves. Wide application of uses in high-crown
portions of hoods, fenders and body panels.
Sizes 31⁄8″ × 3″ × 15⁄8″. Weight 2.9 lbs. |
1061 |
EGG
SHAPED
DOLLY |
 |
This unique shape with high crown design is a
very popular shape, with many different curves
and angles.
Sizes 15⁄8″ × 21⁄2″ × 33⁄4″. Weight 3.1 lbs. |
1064 |
LIGHT
WEIGHT
WEDGE
DOLLY |
 |
Short, slender general purpose dolly. Good hand
grip. Also used for beads or flanges on fenders.
thin edge is useful for corners and beading. Flat
side works under long curve of fender.
Sizes 27⁄64″ × 21⁄2″ × 427⁄64″. Weight 2.7 lbs. |
1065 |
WEDGE
DOLLY |
 |
Long, slender general purpose dolly. Widely
favored by many body repair men for all-around
use. The long, Thin Lip is very useful in working
behind reinforcements.
Sizes 53⁄4″ × 23⁄8″ × 23⁄16″. Weight 4 lbs. |
1067 |
LOW
CROWN
DOLLY |
 |
Specially designed for use on low-crown panels
where medium and high-crown dollies would
stretch the metal. Angle between the sides and
large face is less than 90°, which permits this
dolly to reach into the corner of a flanged edge.
Size 37⁄8″ × 23⁄4″ × 15⁄8″. Weight 3.3 lbs. |
1068 |
“CHAMPION”
HEAVYWEIGHT
DOLLY |
 |
Heavy duty, general purpose fender dolly. A
necessity on heavy gauge fenders which resist
the blows of lighter dollies. Brings out the
toughest damage. Seats comfortably in the
hand and protects fi ngers from a swinging blow.
Sizes 33⁄8″ × 33⁄8″ × 211⁄16″. Weight 4.6 lbs. |
1070 |
BODY & FENDER REPAIR TOOLS: BODY SPOONS
| Type |
|
Description |
Part No. |
LIGHT
DINGING
SPOON |
 |
To ding ridges smooth and level. When
held against ridge and struck with hammer,
spreads blow over large area making
smooth job and preventing damage to metal
or fi nish. Not made for prying. Length 10″
overall. Face 2″ × 45⁄16″. Weight .50 lbs. |
1036 |
COMBINATION
SPOON |
 |
General purpose fender spoon. Used as dolly
behind brackets, inner panels and similar
places. Handle offset to give balance when
dinging and for long reach. Has high-crown
working surface. Face 13⁄4″ × 51⁄2″. Handle 1″
octagon 43⁄4″ long. Weight 3.0 lbs. |
1050 |
SPOON
DOLLY |
 |
Long handle permits many uses in places
otherwise inaccessible. Can be driven
between reinforcements and outer panel,
then used to pry outward as the metal is
dinged. Excellent forming and caulking tool
for the deep pockets of doors, quarterpanels,
rear fenders and lower trunk panels.
Size 21⁄2″ × 1″ × 3″. Weight 4.2 lbs. |
1052 |
LONG
CURVED
SPOON |
 |
Long, thin, curved blade is handy for prying
up dents behind curved reinforcements
in header panels, hinge anchors in doors,
body pillars and reinforcements in hoods
and radiator shells. Length 101⁄2″ overall.
Face 2″ × 7″. Weight 1.5 lbs. |
1054 |
WING-DING
SPOON
DOLLY |
 |
The answer to repair problems on high
fins. A dolly, a spoon, a pry. Long handle
and special contours for working up inside
cramped fi ns. Wide spoon transmits
hammer blows over wide area without
damaging fi nish. 1″ handle diameter,
19″ overall length. Weight 4.5 lbs. |
1056 |
HEAVY DUTY
DRIVING
AND FENDER
BENDING
TOOL |
 |
Useful for restoration of turned under,
non-wired flanged edges. Also handy for
alignment of inner construction and flanges
on alligator hoods. Heavy formed striking
pads. Length 141⁄8″. Weight 3.2 lbs. |
1091 |
CAULKING
IRON |
 |
Excellent precision made wire caulking iron.
Polished working surfaces are rounded
for use on inside moldings. Face 13⁄4″ × 1″.
Overall length 11″. Weight 1.4 lbs. |
1096C |
SURFACING
SPOON |
 |
Excellent spoon for fender spring
hammering, finishing and shaping. Curve
gets behind inner construction between
panels that are close for removal of
dents. Molds panels. Blade fully polished.
9” Blade Length. 21⁄8″ Width.
Overall Length 151⁄8″. Weight 2.5 lbs. |
1024 |
MEDIUM
CROWN
SPOON |
 |
Long slender shape just like the 1024 surfacing
spoon. Inside with medium crown, for high
ridges or prying. For slapping and surface
finishing on fenders, panels and trunk lids.
Blade fully polished. 9″ Blade Length. 21⁄8″
Width. Overall Length 147⁄8″. Weight 2.5 lbs. |
1026 |
HEAVY DUTY
DOUBLE END
S-SPOON |
 |
General purpose fender and frame spoon.
Designed to provide further reach on panels
and behind reinforcements. Prying, heavy
duty designed for use on SUV frames. 123⁄16″
Length. 13⁄8″ X 21⁄4″ Face. Weight 2.1 lbs. |
1044 |
BODY & FENDER REPAIR TOOLS: MISCELLANEOUS
| Type |
|
Description |
Part No. |
ADJUSTABLE
AND
FLEXIBLE
FILE
HOLDERS |
 |
Permits use of files to 14″. Handle
adjustable for both right and left hand use
for working close to offset or panels. Permit
flexing either way to maximum point of
safety against breakage. Weight 1.7 lbs. |
1150 |
STANDARD
14″
BODY
FILE |
 |
Vixen milled, curved tooth. Plain blade.
Flexible, standard cut, 8 tooth. 14″ long.
Weight .66 lbs. |
1158F |
STRAIGHT
SHELL
BODY
FILE |
 |
Vixen milled, curved tooth. Plain blade. Half
round shell, 8 tooth. Concave for shallow
concave work.14″ long. Weight .66 lbs. |
1163F |
BODY
DENT
PULLER
TOOL |
 |
Slide hammer activated. This tool provides
a remarkably simple and easy method of
removing a dent in a door or panel. Merely
punch or drill a hole in the deepest part
of the damage and insert a self-threading
screw or hook. A few light impacts with
the slide hammer will return the metal to
original position. Shaft is 1⁄2″ × 13″ with
locking device to keep screw from turning.
Cadmium and black oxide rust-proof finish.
Weight 3.9 lbs. |
DP38 |
THE KEY
TO
METAL
BUMPING |
 |
This book, entitled “The Key to Metal
Bumping,” is an excellent instruction
manual and guide for every body man or
student. It provides authoritative reference
for techniques and methods for all phases
of body and fender work. Its 126 pages
cover most approaches to body repair
problems. Visual assistance is rendered
by more than 100 illustrations. It includes
explanations of many time-saving short-cut
methods to make the job easier and better.
Among other features is a glossary of terms
used in the trade. This is the third edition.
The first was published in the late 1930s
and has become a classic in its field. |
BFB |
BODY & FENDER REPAIR TOOLS: TOOL SETS
| Part No. |
659K |
WOOD HANDLES |
10 TOOLS |
153G - Cross chisel Straight Hammer
158G - General Purpose Pick Hammer
160G - Heavy Duty Bumping Hammer
164G - Utility Pick Hammer
1058 - Toe Dolly Block
1059 - Heel Dolly Block
1060 - General Purpose Dolly Block
1036 - Light Dinging Spoon
1150 - Adjustable File Holder
1158F - Body File Standard 14″
BFB - Instruction Manual
BX18 - Tool Box |
 |
| Part No. |
691K |
WOOD HANDLES |
15 TOOLS |
153G - Cross Chisel Straight Hammer
156G - Pick Hammer
158G - General Purpose Pick Hammer
160G - Heavy Duty Bumping Hammer
161G - Dinging Hammer
164G - Utility Pick Hammer
1058 - Toe Dolly Block
1059 - Heel Dolly Block
1060 - General Purpose Dolly Block
1036 - Light Dinging Spoon
1052 - Spoon Dolly
1050 - Combination Spoon
1150 - Adjustable File Holder
1158F - Body File Standard 14″
162G - Shrinking Hammer
BFB - Instruction Manual
BX18 - Tool Box |
 |
| Part No. |
692K |
WOOD HANDLES |
25 TOOLS |
150G - Dinging Hammer
153G - Cross Chisel Straight Hammer
153GB - Cross Chisel Curved Hammer
155G - Fender Bumper
156G - Pick Hammer
156GB - Curved Pick Hammer
158G - General Purpose Pick Hammer
160G - Heavy Duty Bumping Hammer
161G - Dinging Hammer
162G - Shrinking Hammer
164G - Utility Pick Hammer
168G - Cross Peen Finishing Hammer
169G - Large Face Pick Finishing Hammer
1036 - Light Dinging Spoon
1050 - Combination Spoon
1052 - Spoon Dolly
1054 - Long Curved Spoon
1058 - Toe Dolly Block
1059 - Heel Dolly Block
1060 - General Purpose Dolly Block
1061 - Utility Dolly Block
1068 - Low Crown Dolly Block
1091 - Heavy Duty Driving Spoon
1150 - Adjustable File Holder
1158F - Body File Standard 14″
BFB - Instruction Manual
BX17 - Tool Box |
 |
| Part No. |
644K |
WOOD HANDLES |
4 TOOLS |
158G - General Purpose Pick Hammer
153GB - Cross Chisel Curved Hammer
1036 - Light Dinging Spoon
1058 - Toe Dolly Block
|
 |
| Part No. |
644KFG |
FIBERGLASS HANDLES |
158FG - General Purpose Pick Hammer
153FGB - Cross Chisel Curved Hammer
1036 - Light Dinging Spoon
1058 - Toe Dolly Block |
| Part No. |
647K |
WOOD HANDLES |
7 TOOLS |
153GB - Cross Chisel Curved Hammer
162G - Shrinking Hammer
164G - Utility Pick Hammer
1036 - Light Dinging Spoon
1058 - Toe Dolly Block
1059 - Heel Dolly Block
1060 - General Purpose Dolly Block |
 |
| Part No. |
647KFG |
FIBERGLASS HANDLES |
153FGB - Cross Chisel Curved Hammer
162FG - Shrinking Hammer
164FG - Utility Pick Hammer
1036 - Light Dinging Spoon
1058 - Toe Dolly Block
1059 - Heel Dolly Block
1060 - General Purpose Dolly Block |
| Part No. |
694K |
WOOD HANDLES |
4 TOOLS |
158G - General Purpose Pick Hammer
153GB - Cross Chisel Curved Hammer
164G - Utility Pick Hammer
170G - Door Skin Hammer |
 |
| Part No. |
694KFG |
FIBERGLASS HANDLES |
4 TOOLS |
158FG - General Purpose Pick Hammer
153FGB - Cross Chisel Curved Hammer
164FG - Utility Pick Hammer
170FG - Door Skin Hammer |
 |
|