|
 KPP POLYESTER PRIMER SURFACER is a corrosion-resistant, sanding primer surfacer based on an air-drying polyester resin. The pigmentation is carefully balanced for optimum sanding properties. It is fast drying and has excellent filling properties and adhesion over fiberglass, metal, plastic and wood. Can be topcoated with all types of finishes, acrylics, lacquers, synthetic enamels and two-component urethane coatings.
All KPP Polyester Primers are sold as a kit that includes enough hardener for the container size that is purchased. Extra hardener is available and sold separately if needed.
KUS KPP105-GL - Polyester Primer Surfacer (Gray)
KUS
KPP105-QT - Polyester Primer Surfacer (Gray)
KUS KPP106-GL - Polyester Primer Surfacer (Black)
KUS KPP106-QT - Polyester Primer Surfacer (Black)
KUS KPP107-GL - Polyester Primer Surfacer (Buff)
KUS KPP107-QT - Polyester Primer Surfacer (Buff)
KUS KPP108-GL - Polyester Primer Surfacer (White)
KUS KPP108-QT - Polyester Primer Surfacer (White)
KUS KPP109-GL - Polyester Primer Surfacer (Red Oxide)
KUS KPP109-QT - Polyester Primer Surfacer (Red Oxide)
Extra Polyester Primer Surfacer Hardener
KUS KPH911-LRG -
Poly Hardener (large)
KUS KPH911-SM -
Poly Hardener (small)
Poly Hardener MSDS (Adobe Acrobat Reader needed)
Kustom Shop Products, especially those which contain isocyanates are for professional use only and are not intended for sale to the general public. It is important that you read and understand the specific MSDS prior to purchasing or using any of our products.
KUS KT912-GL - Compliant Solvent and Kleaner, 1 Gallon
PCL 2010-GL - Acetone, 1 gallon
 Kustom Poly-Glaze
This high performance polyester finishing putty is a unique formula for final finishing over body filler, rust pits, pin holes, small holes, scratches, old painted surfaces, cured primed surfaces and topcoats. Poly-Glaze multi-surface finishing putty is ideal for metal and most flexible or rigid plastic parts. Poly-Glaze is flowable, spreads easily and is fast leveling. This tack free formula is ready to sand in 10 - 15 minutes. Mix Ratio: 50:1 Part KPG101 with KPG102 Blue Hardener. Poly-Glaze KPG101 is sold as a kit with enough KPG102 Hardener to activate the entire tube. Additional KPG102 Hardener is available and sold separately as necessary.
KUS KPG101 - Poly-Glaze Kit (24 Oz Tube of Poly-Glaze plus separate tube of hardener)
Additional Hardener:
KUS KPG102 - Poly-Glaze Hardener, Tube
|