KK INTENSIFIER™ KANDY KONCENTRATE

GENERAL INFORMATION

Kandy Koncentrates are used to richen any of our Kosmic Kolor® Urethane Enamel Kandys or Kustom Kolor® Acrylic Lacquer Kandys. Kandy Koncentrates:

• Get you through the tough stuff fast, saving time and material.
  
• Are perfect for motorcycles or small parts when speed is a factor.
  
• Are great for touch ups.
  
• Tint Kandys for additional colors. Example: Add a small amount of KK-9 Organic Green Kandy Koncentrate to K-2 Lime Gold Kandy to make a beautiful Lime Green Kandy.
  
• Strengthen Kandys for faster coverage on frames, door jambs, under trunk and hood areas, etc. Topcoats can literally be cut in half with Kandy Koncentrates.
  
• May be added to SG-100 Intercoat Clear (for urethane enamel topcoats) or SC-1 Sunscreen Clear (for acrylic lacquer topcoats), for multi-colored Kandy tape outs with minimal build. Dry fast, so many colors may be applied in one day.
  
• Have long term shelf life.

Use factory packaged Kandys for overall refinishing and for maximum longevity.

IMPORTANT NOTE

For best results we recommend that you use only House of Kolor® products when mixing. Use care when adding Intensifier to other companies' products. Carefully check chemical compatibility by doing your own individual testing before use.

IMPORTANT INFORMATION ABOUT KK'S

The following KK's have a tendency to bleed through art work applied over them. Always use our Bleed Check Sealer SBS-10 before any artwork is applied. See tech sheet for more information on Bleed Check Sealer. A catalyzed clear coat will NOT stop their tendency to bleed.

The KK products are: KK-03, KK-05, KK-06, KK-10, and KK-13.

IMPORTANT INFORMATION ABOUT KK-18 KANDY PINK

KK-18 Kandy Koncentrate Pink has limited light fastness and showed only be used on products that have limited exposure to sunlight. Use with discretion. KK-18 is recommended for show vehicles.

1. MIXING & APPLYING KANDY KONCENTRATE

Generally, to make one gallon of unreduced Kandy requires two 8 oz. cans of Kandy Koncentrate to one gallon of Klear. Use this information as a guide when mixing.

For Urethane Enamel Finishes:

• When mixing with Kosmic Kandys, UC-1 Klear, UC-35 Klear, UFC-1 Flo-Klear, UFC-35 Flo-Klear or UFC-19 Komply Klear, reduce and catalyze, making 1 quart.
• Then begin adding Kandy Koncentrate in half ounce increments. Usually by viewing the stir stick, the degree of intensity can be determined.
• Color should appear rich to achieve color density in few coats. See tech sheet for Kandy and appropriate clear tech sheets for mixing and application instructions.
• When mixing with SG-100 Intercoat Clear, simply reduce and begin adding Kandy Koncentrate in half ounce increments.
• DO NOT APPLY MORE THAN 4 COATS OF SG-100.
• Not recommended for overall paint application and is not designed for hi-build. See tech sheet for mixing and application instructions.

NOTE: Generally, a 1 to 1 reduction prior to addition of Kandy Koncentrate is common.

For Acrylic Lacquer Finishes:

• When mixing with Kosmic Kandys and SC-1 Sunscreen Clear, thin, making 1 quart.
• Then begin adding Kandy Koncentrate in half ounce increments. Usually by viewing the stir stick, the degree of intensity can be determined.
• Color should appear rich to achieve color density in few coats.
• See tech sheet for Kandy and appropriate clear tech sheets for mixing and application instructions.
• When matching door jambs, etc., to the outside color - check color match frequently. It is easy to get too dark before you know it.
• If color should become too dark, you may add small amounts of your base to the Kandy to lighten it, then return to straight mixed Kandy to achieve your color match.