Part# UPO 721-2/726
2 Liters of U-POL Brand
BLACK HS GRAVITEX PLUS Stone Chip Protector with Free Application Gun ($30.00 Value)

Completely Paintable after it Dries!

GRAVITEX PLUS is a tough, hard, durable coating designed to reproduce the manufacturers original stone chip finish. It will protect against stone chips, salt, damp and rust. GRAVITEX PLUS will also help to deaden sound and vibrations and is, therefore, ideal for application to panels andinside engine compartments. The high buildformula will cover weld marks and seams, often in one application. Works great as a auto undercoating or as a rocker guard coating. Can be topcoated to match the cars paint color.

GRAVITEX PLUS Stone Chip Protector can be used on the following surfaces:

• Suitably prepared bare metal. For overcoating aluminium U-POL ACID #8 etch primer is recommended.
• Original paint surfaces (with the exception of thermoplastic acrylics).

Thoroughly clean and degrease old paint surfaces with a suitable spirit wipe or thinner. Wet flat with 400 grade paper. For bare metal use 180 grade paper. Re-clean and dry.

Application
Shake the tin before use. Apply with a clean Schutz gun or brush. Allow approximately 10-15 mins. for the solvent to flash off when building a thick coat.

Thinners
GRAVITEX PLUS is supplied ready for use. However, up to 5% of good quality cellulose thinners may be added to vary the texture. Use cellulose thinners or similar proprietary products to clean the gun after use.

Build and Pressure
One coat of GRAVITEX PLUS will give a build of approximately 100-150 microns and a pressure of between 2.76 - 4.82 BAR is required at the gun. Less or more pressure will give a flatter or more rippled effect.

Drying time
Approximately 2 hours at normal shop temperature or 30 mins. at low bake (80 degrees C). Drying time is dependent on film thickness, humidity and temperature.

Over-Painting
GRAVITEX PLUS may be over-painted with most paint systems. With 2 pack acrylic paints its can be over-painted wet on wet. For optimum gloss and protection from fading, the use of a U.V Clear is recommended.

Hippo Liner

Dominion Sure Seal's latest innovation is their revolutionary new Urethane paste based protective coating. Ideally suited for applications to Truck Beds (replaces drop-in plastic liners), Trailers, Hoppers, Boats, Off-Road Vehicles, RVs and almost anything that requires a durable coating. This rugged coating not only looks good but it protects surfaces against a wide range of extreme conditions and extends truck-box longevity.

DOM BHBLUR - Dominion Hippo Liner, black, .45 gal.

Gator Guard II

Sure Seal Gator Guard is a superior quality epoxy/urethane blended liquid bed-liner for uses such as pick up trucks, buses, vans, delivery vehicles, construction equipment, concrete floors, farm equipment, off the road construction equipment, marine and many other uses. This very rugged product withstands abrasion, gasoline, acids and has a very high tear strength. Excellent flexibility. Extremely versatile and inexpensive. Has more advantages than rigid plastics, metals, ceramics and does not have any isocyanates such as in polyurethane type products. Very low VOC'S (volatile organic compounds).

DOM BGG2 - Gator Guard, black, 1 quart
DOM BGG21 - Gator Guard, black, 1 gallon
DOM BGG25 - Gator Guard, black, 5 gallons
DOM BGG2W - Gator Guard, white, 1 quart
DOM BGG21W - Gator Guard, white, 1 gallon

Color Your Hippo

Dominion Sure Seal's tintable urethane based protective coating allows you to protect any surface with any color! Color Your Hippo is a versatile coating and can be use to protect Truck Beds (replaces drop-in plastic liners), Trailers, Boats, Off-Road Vehicles, RV's, fences, decks, and lawn furniture. This rugged colored protective coating not only looks good but it protects surfaces against a wide range of extreme conditions and extends longevity of almost any surface.

DOM BCYH - Color Your Hippo Tintable Coating Kit

Enviro Liner Truck Bed Kit

The worlds first, patented and environmentally safe sprayable bedliner and heavy duty coating. No mixing, no solvents, no moisture problems, minimal surface preparation. Drive away in 15 minutes. Ready for medium duty in a couple of hours and heavy duty in less than 24 hours. No odor. Apply with Dominion's new sprayable gun. (see below) Everything you need for the job is contained in our large bed (BDL3) or small bed (BDL2) kits. Complete instructions contained in the kit in English, Spanish and French. Two sizes available: a large liner kit that contains 3 x 1500ml cartridges A medium liner kit that contains 2 x 1500ml cartridges. Thickness of product from 10ml and upwards.

DOM BDL2 - Enviro Liner Small Kit
DOM BDL3 - Enviro Liner Large Kit

Part# UPO 0820V-GUN U-POL Raptor BLACK Truck Bed Liner Coating Kit Premium Product without the Premium Price! Kit Contains: • 4 — 750ml Bottles of Truck Bed Liner Base • 1 — 1L System 20 Standard Hardener • Includes Free Application Gun ($30.00 Value) Sprayable Material: 4 Liters or 1.06 Gallons Coverage: 125 square foot per US Gallon (mixed) BLACK RAPTOR LINER U-POL'S RAPTOR Truck Bed Liner is a 2K paint designed for applying to the rear bed of pick up trucks. The urethane formulation dries rapidly and provides excellent UV protection. Users can control the pot life and drying times by choosing different speeds of U-POL hardeners. Tough, durable 2 pack urethane coating (Available in Black or Tintable) UPO 820V-GUN - U-POL Raptor Truck Bed Liner Kit with Gun, Black UPO 726 - U-POL Truck Bed Line Gun Benefits: • Easy to use: SIMPLY FILL - SHAKE - SHOOT (see instructions below) • Enough material to re-spray the largest truck beds • No need to wax after application • Abrasion and Stain Resistant • Protects against rust, corrosion salt, damp & extreme temperatures • Waterproof, flexible, helps deaden sound & vibrations • Apply with shutz gun, roller or brush to obtain different textures • Provides excellent adhesion Mixing Ratio: 3:1 Truck Bed Liner Base: System 20 Standard Hardener Reducer: Recommend fast reducer System 2042 up to 10% as required to reduce the texture. Specification: Pot life at 68 degrees F / 20 degrees C : 60 minutes Touch Dry at 68 degrees F / 20 degrees C : <1 hour subject to film build. Light duty: 2-3 days at 68 degrees F / 20 degrees C. Regular duty: 5-7 days at 68 degrees F / 20 degrees C. Coverage: 125 square foot per US Gallon (mixed). Preparation: U-POLs Truck Bed Liner can be applied to most original manufacturers finishes. The surface should be lightly scuffed, and free from dirt and rust. For best results bare metal should be treated with a suitable etch primer e.g. U-POL ACID#8 (UP0776/ UP0741)

Part# UPO 0821V-GUN U-POL Raptor TINTABLE Truck Bed Liner Coating Kit Raptor Liner Tintable Version (Add up to 10% of base color to tint) Premium Product without the Premium Price! Kit Contains: • 4 — 750ml Bottles of Truck Bed Liner Base • 1 — 1L System 20 Standard Hardener • Includes Free Application Gun ($30.00 Value) Sprayable Material: 4 Liters or 1.06 Gallons Coverage: 125 square foot per US Gallon (mixed) BLACK RAPTOR LINER U-POL'S RAPTOR Truck Bed Liner is a 2K paint designed for applying to the rear bed of pick up trucks. The urethane formulation dries rapidly and provides excellent UV protection. Users can control the pot life and drying times by choosing different speeds of U-POL hardeners. Tough, durable 2 pack urethane coating (Available in Black or Tintable) UPO 821V-GUN - U-POL Raptor Truck Bed Liner Kit with Gun, Tintable UPO 726 - U-POL Truck Bed Line Gun Benefits: • Easy to use: SIMPLY FILL - SHAKE - SHOOT (see instructions below) • Enough material to re-spray the largest truck beds • No need to wax after application • Abrasion and Stain Resistant • Protects against rust, corrosion salt, damp & extreme temperatures • Waterproof, flexible, helps deaden sound & vibrations • Apply with shutz gun, roller or brush to obtain different textures • Provides excellent adhesion Mixing Ratio: 3:1 Truck Bed Liner Base: System 20 Standard Hardener. Up to 10 % of your basecoat color paint can be added to tint color. Reducer: Recommend fast reducer System 2042 up to 10% as required to reduce the texture. Specification: Pot life at 68 degrees F / 20 degrees C : 60 minutes Touch Dry at 68 degrees F / 20 degrees C : <1 hour subject to film build. Light duty: 2-3 days at 68 degrees F / 20 degrees C. Regular duty: 5-7 days at 68 degrees F / 20 degrees C. Coverage: 125 square foot per US Gallon (mixed). Preparation: U-POLs Truck Bed Liner can be applied to most original manufacturers finishes. The surface should be lightly scuffed, and free from dirt and rust. For best results bare metal should be treated with a suitable etch primer e.g. U-POL ACID#8 (UP0776/ UP0741)

Part# UPO 726 U-POL Undercoat Spray Gun for Raptor or Gravitex Coatings Use for the application of: • U-POL RAPTER Truck Bed Liner Coating • U-POL GRAVITEX Anti-Stone Chip Coating Features: • Easy to use, lightweight and easy to clean. • Low maintenance. • Used to replicate OEM textured stone chip finish.

Applicator Guns

Dominion's pneumatic air gun is manufactured for using with 1 set of their Enviro Liner cartridges. Easy to use. All parts and acessories are included.

DOM TBDL3 - Applicator Gun For Enviro Liner

Dominion's "Shutz" Siphon Gun is used for undercoating, gravel guard, and any sprayable bedliner. This gun can be used to apply Hippo Bed Liners, Color My Hippo, and Gator Guard II.

DOM BUPA - BUPA Gravel Guard Gun

Bedliner Tapes

Our wire and fiber tapes are intended for use with all of our bedliner products. Using Dominion's bedliner tapes, you can be assured of a perfect line every time. (Wire Tape is shown.)

DOM WBWT - Bedliner Wire Tape, 100-foot roll
DOM WBFT - Bedliner Fiber Tape, 100-foot roll