ZOLATONE Basecoat Primers
Zolatone 20 Multicolor spatter finishes
Z91 Zo Ferro Basecoat Primer-Sealer for Metal
ZO-FERRO®
is a one-component, water based, low VOC, rust inhibiting, non-sanding
basecoat primer and sealer. ZO-FERRO metal primer-sealer offers corrosion
protection on metal surfaces which helps vehicles retain their anti-corrosive
structural integrity. Made specifically for use with Zolatone 20 coatings,
ZO-FERRO metal primer sealer is intended for previously painted surfaces;
however, it is acceptable to use on prepared bare aluminum.
VOC compliant and ISOCYANATE FREE, non-sanding ZO-FERRO is ready to
use with no reducing or thinning needed. ZO-FERRO provides excellent
adhesion and flexibility over virtually all types of ferrous metal
surfaces and aluminum for both interior/exterior use. Metal surfaces
can be primed ahead prior to painting.
ZOL Z9102-1 - Zo-Ferro
Metal Primer, White (Gallon)
ZOL Z9102-4 - Zo-Ferro
Metal Primer, White (Quart)
Z91 Technical Information
Application:
Apply by spray only. Apply one medium wet coat at 50 lbs. pressure
at the gun. Clean with water immediately while wet; lacquer thinner
after dry. Do not allow to dry in the gun or equipment.
- New galvanized metal must be chemically treated prior to priming
and painting.
- Rusted metal should be treated with a rust converting or removing
solution prior to priming with Z91 ZO-FERRO.
Technical Data:
57.6% solids by weight. 43% solids by volume. (Approx.)
Weight:
10.45 pounds/gallon.
Flash Point:
Water based, not applicable
V.O.C.:
Coating less water - 210 max. gms/liter; 1.75 lbs./gal. Material
with water - 127 max. gms/liter; 1.06 lbs./gal.
Theoretical Coverage:
Approx. 250-400 sq. ft./gal. depending upon surface
roughness and method of application.
Dry Time:
Tack free 15-30 min.; one hour to recoat at 70 degrees Fahrenheit
and 50% humidity.