Premium Product without the Premium Price!

Easy to use! FILL - SHAKE - SHOOT

U-POL'S RAPTOR Truck Bed Liner is a 2K paint designed for applying to the rear bed of pick up trucks. The urethane formulation dries rapidly and provides excellent UV protection. Users can control the pot life and drying times by choosing different speeds of U-POL hardeners.

• Enough material to re-spray the largest truck beds.
• Abrasion and Stain Resistant
• Protects against rust, corrosion salt, damp & extreme temperatures
• Waterproof, flexible, helps deaden sound & vibrations

Kits Include:

• 4 — 750ml Bottles of Truck Bed Liner Base
• 1 — 1L System 20 Standard Hardener
  • Kit item #'s UPO 0820V-GUN, UPO 0821V-GUN include Free Application Gun ($30.00 Value)

Sprayable Material: 4 Liters or 1.06 Gallons

Coverage: 125 square foot per US Gallon (mixed)

Benefits:

• Easy to use: SIMPLY FILL - SHAKE - SHOOT (see instructions below)
• Enough material to re-spray the largest truck beds
• No need to wax after application
• Abrasion and Stain Resistant
• Protects against rust, corrosion salt, damp & extreme temperatures
• Waterproof, flexible, helps deaden sound & vibrations
• Apply with shutz gun, roller or brush to obtain different textures
• Provides excellent adhesion

Sprayable Material: 4 Liters or 1.06 Gallons

Coverage: 125 square foot per US Gallon (mixed)

Mixing Ratio: 3:1 Truck Bed Liner Base: System 20 Standard Hardener

Reducer: Recommend fast reducer System 2042 up to 10% as required to reduce the texture.

Specification:
Pot life at 68 degrees F / 20 degrees C : 60 minutes
Touch Dry at 68 degrees F / 20 degrees C : less than 1 hour subject to film build.
Light duty: 2-3 days at 68 degrees F / 20 degrees C.
Regular duty: 5-7 days at 68 degrees F / 20 degrees C.
Coverage: 125 square foot per US Gallon (mixed).

Preparation: U-POLs Truck Bed Liner can be applied to most original manufacturers finishes. The surface should be lightly scuffed, and free from dirt and rust. For best results bare metal should be treated with a suitable etch primer e.g. U-POL ACID#8 (UP0776/ UP0741)