All Uni-Spotters available in 220 volt with 50 or 60hz by special order.
Call (858) 909-2900 or e-mail us at Support@AutoBodyDEPOT

Part# UNI 007-HS2020 UNITEC GRAVITY FEED HAND HELD SANDBLASTER with HOT SPOT Recovery System Sandblaster color may vary from Blue to Red HS2020 turns your Speed Blaster into a self-contained spot blast system capable of virtually eliminating blast overspray. Simply attach one of the four blast cones provided, push the HotSpot™ over the Speed Blaster’s ceramic nozzle and go. The individual shapes of the four blast cones conform to any surface. Hold the HS2020 blast cone tightly to the work piece and pull the trigger. The blast media, rust, scale and debris are instantly directed into the breathable collection bag. Used correctly, the system will virtually eliminate debris and dust, which reduces cover-up and clean-up time. When the collection bag is full, simply remove the blast cone and shake contents out. It’s that easy. Speed Blaster Information This Speed Blaster is ideal for all your small to medium size sand blasting jobs! It is FAST and EASY to use, LIGHTWEIGHT and PERFECTLY balanced. It has a recommended air pressure of 100 PSI and an average of 12 CFM. When used properly it will deliver hours of quality sand blasting time. This SPEED BLASTER'S unique gravity feed design is unsurpassed in Performance, Quality, and Sand Flow Consistency. • Rust, scale and corrosion are tough to fully remove. Blasting high-speed media particles at the work piece is the best way to get into all the small niches in the metal to ensure complete removal. • Speed Blaster’s™ gravity fed, safety vented reservoir tank eliminates tubes or siphon hoses that can easily clog. • Speed Blaster runs continuously and virtually clog free with the correct media and moisture-free air. And you can use a variety of blast media that do not exceed 14 grit. • The lightweight, long-lasting, comfortable design employs gravity to help force the blast media into a hardened steel mixing chamber. Compressed air then forces the particles through a top grade alumina ceramic nozzle at extraordinary velocity.  • Speed Blaster is self-contained and small for easy storage in a toolbox drawer. The next time you need to blast something, just connect compressed air and go. SPEED BLASTER SPECIFICATIONS • Operating Pressure 60 -100 PSI • Working Pressure 70 -100 PSI • Air Consumption 10 CFM - 100 PSI • Min. Air Compressor 3 HP • Fitting Size 1/4 NPT • Container Capacity 26 Oz. (Vol.) • Gun Material ABS • Empty Weight 14 Oz. • Max. Particle Size 14 Grit • Colors Available Red, White, Blue • 2 Year Limited Warranty • Eye protection must be worn. UNI 007-HS2020 $79.99

 

Part# UNI 007-X UNITEC Gravity Feed Hand Held Speed Blaster Sandblaster Sandblaster color may vary from Blue to Red This SANDBLASTER is ideal for all your small to medium size sand blasting jobs! It is FAST and EASY to use, LIGHTWEIGHT and PERFECTLY balanced. It has a recommended air pressure of 100 PSI and an average of 12 CFM. When used properly it will deliver hours of quality sand blasting time. This SPEED BLASTER'S unique gravity feed design is unsurpassed in Performance, Quality, and Sand Flow Consistency. • Rust, scale and corrosion are tough to fully remove. Blasting high-speed media particles at the work piece is the best way to get into all the small niches in the metal to ensure complete removal. • Speed Blaster’s™ gravity fed, safety vented reservoir tank eliminates tubes or siphon hoses that can easily clog. • Speed Blaster runs continuously and virtually clog free with the correct media and moisture-free air. And you can use a variety of blast media that do not exceed 14 grit. • The lightweight, long-lasting, comfortable design employs gravity to help force the blast media into a hardened steel mixing chamber. Compressed air then forces the particles through a top grade alumina ceramic nozzle at extraordinary velocity.  • Speed Blaster is self-contained and small for easy storage in a toolbox drawer. The next time you need to blast something, just connect compressed air and go. SPECIFICATIONS • Operating Pressure 60 -100 PSI • Working Pressure 70 -100 PSI • Air Consumption 10 CFM - 100 PSI • Min. Air Compressor 3 HP • Fitting Size 1/4 NPT • Container Capacity 26 Oz. (Vol.) • Gun Material ABS • Empty Weight 14 Oz. • Max. Particle Size 14 Grit • Colors Available Red, White, Blue • 2 Year Limited Warranty • Eye protection must be worn. UNI 007-X $49.50

---

9000 Uni-Spotter Deluxe
Superior stud welding kit

5500 Stinger Plus
Great mid-range kit

5050 Stinger
Basic mid-range kit

4500 Starter Kit
Ideal starter kit

Click for Stud Welder Brochure (pdf format)

Glue Puller

Click for Glue Puller Brochure (pdf format)

Click for H & S Parts and Accessories