| Cart Total |
|
|
| Subtotal: |
$0.00 |
| Tax: |
$0.00 |
| Total: |
$0.00 |
|
View Cart |
|
|
|
|
|
Pulling Tools
Tools to make auto repair go faster.
The Original Pull Rod Set
 Steck's classic pull rod set has been a staple tool for autobody repair and restorers for years.
- Super tough alloy steel is precisely heat-treated for maximum strength.
- Every Steck Pull Rod and Pick Pull is factory tested under a 500 pound (228 kg) load.
- Vinyl coated handle is comfortable to use.
Stud Lever
Allows the technician to quickly grip studs (pull pins) and controll the dent pulling process as well as the accuracy of the pull.
- Accurate controlled pulls every time
- Grips studs (pull pins) quickly & easily
- Standard tool works on both 2.2 and 2.6 mm studs as close as 3/8" apart
- Black pivoting base helps compress crown as dent is pulled
- Includes STECK Straight Edge #20003 for matching original contours
 Steck Manufacturing Company has released another winning tool: The Stud Lever (P/N 20014) will allow a technician to quickly grip studs (pull pins) and controlling the dent pulling process as well as accuracy of the pull.
A strong reinforced Nylon lever with pivoting base and self-locking stud capture mechanism allows the technician to quickly lock and lever studs while also compressing the crown area of the dent with the pivoting base. Adjustable pivot base on the Stud Lever allows one-handed operation and provides increased leverage, accuracy and reach for the pull and crown compression processes both vertical and horizontal, including roofs and lower rocker panels.
Stud Lever’s unique stud capture mechanism allows technician to quickly and easily capture both 2.2mm and 2.6mm studs as close as 3/8 inches apart.
Included with the Stud Lever is the Steck Straight Edge, part number 20003, which allows the technician to align the stud pull with the non-damaged metal area for accurate pulls on the initial pull which minimizes metal work and reduces the need for slide hammers.
Labor/Material Savings: Quick attachment to stud while combining leverage, accuracy and compression of crown area with the initial pull reduces the metal work in the dent repair process by 15 minutes per hour.
SeamBuster
 Heavy-duty chisel that allows for easy separation of spot welded or bonded panels.
- Save up to 15 minutes per panel replacement.
- For quarter panels, rockers and any other pinchweld.
- Sharpened on two edges, the sharp end allows for penetration between panels and the side edge allows for side impact to drive the panels apart without damage.
- Super tough allow steel.
- Cushioned handle absorbs shock.
Right Angle SeamBuster
90 degree end to easily separate hard-to-reach spot welded or bonded panels.
- Save up to 15 minutes per panel replacement.
- For quarter panels, rockers and any other pinchweld.
- Sharpened on two edges, the sharp end allows for penetration between panels and the side edge allows for side impact to drive the panels apart without damage.
- Super tough allow steel.
- Cushioned handle absorbs shock.
The Bulldog, Curved Clamp
 Curved clamp is perfect for pulling SUV and van hatch openings.
- Saves time! Up to an hour per repair..
- Save the panel. Grabs the curved pinchweld where no other clamp will attach.
- Pulls the pinchweld to accurately seal the weatherstrip to the hatch.
- Individually adjustable teeth to assure secre attachment to pinchweld.
- Elongated hole accepts any hook for fast setup and pulling.
Quarter Puller
 12 inch bars pull quarter panels and wheel wells.
- Hooks above the lip of the wheel opening.
- Two curvatures (one on each side) will fit almost all cars.
- Easier and faster than clamps or jacks.
- 3000 lb. max. pull
- Q.P. II for smaller openings
Q.P. II
12 inch bars pull quarter panels and wheel wells.
- Hooks above the lip of the wheel opening.
- Two curvatures (one on each side) will fit almost all cars.
- Easier and faster than clamps or jacks.
- 3000 lb. max. pull
- Q.P. II for smaller openings
Fender Fixer
 Collision force to one front fender often travels through the hood to push out the top of the opposite fender. The Fender Fixer rolls that fender top back into shape in just minutes.
- Hook strap below fender.
- Place chisel point of tool into corner of bolt flange of fender. Adjust strap.
- Lifting motion rolls fender into desired location. Hammer top of tool to set.
See the Fender Fixer video.
BigBite Radius Clamp with Side Pull Ring
For pulling hard-to-clamp corners.
- Allows side pulls on corners of door openings, or in-line pulls with the optional linear pull ring.
- Also works in other hard-to-pull places for multi-directional pulls... and reverse pulls.
E-Z Pull Pliers
For pull pins and flanges. Pulls up to 2000 lbs.
- Grip and pull multiple pull pins studs and vertical or horizontal flanges.
- 3.5 inch jaw provides evenly distributed pulling force while pulling multiple pull pins or flanges.
- 2 large pulling rings for light pulling (up to 2,000 lbs.)
Pogo II
 A hand-held heavy-duty tool for fast leverage and pulling.
- One hand operation.
- Core supports repaired quickly.
- Hook bolt heads, flanges, anywhere...
- Fits in your toolbox (overall length 18-3/8")
 Handy Pull eye bolts allow you to pull hinges, etc. A hood hinge plate allows you to pull hood and deck lid hinges back into position.
KIT INCLUDES:
- Right Angle Pulling Plate
- 10mm Eye Bolt
- 8mm Eye Bolt
- 6mm Eye Bolt
- Hood Hinge Plate
Bed Lifter
 A bracket designed just to lift truck beds.
- Lift pick-up truck beds safely and easily
- Lifting bracket adjusts to evenly distribute weight
Iron Hand
The Iron Hand easily pulls closed end rails using the existing isolator shock absorber. The wide flange tool also realigns floor jams, rocker panels, pillars and other hard-to-clamp areas, without additional damage to the vehicle.
- Iron Hand installs quickly on shock absorbers for pulls in any direction (read instructions carefully).
- Iron Hand adjusts to pull most rocker panels, door jams and pillars.
|