A versitile step designed for the bodyshop.

• Heavy Duty (500 lb. cap.) Platform (32" x 16")
• Foam Bumpers Protect Vehicle Finish
• Spring Loaded Retractable Wheels,
  You Can Push It With Your Foot
• Extra-Wide (23") Base Rails for Stability
• Height Adjustable from
  6-1/2" to 22-1/2"
• Heavy Duty (Weight - 45 lbs.) Construction

See the ProStep video.

High quality mini-files make removing dirt blemishes and runs in paint a breeze.

• Removes Runs & Dirt Nibs
• Honed tips of teeth shave without digging in
• Available in coarse and fine

• Gray Side - Soft & Pliable
• Black Side - Stiff

These sanding blocks were designed for wet or dry sanding. The Double Desnisy Sanding block has two densities to accommodate a variety of sanding needs. The dark grey side is soft and pliable for sanding irregular surfaces. The light grey side is stiff for faster sanding on curved surfaces.

Easily removes striping and double faced tape from body and side mouldings.

• Works best at low RPMs, even on cordless drills! (1500 RPM max.)
• Removes pin-striping tape
• Removes double faced tape from body and side mouldings
• Works faster and lasts four times longer than discs requiring high RPMs

Steck's Paint 'N Stick Combo combines the capabilities of the Paint 'N Stick (#35660) for easy painting of traditional outside mirror assemblies with the adjustable 6 inch Grip 'N Paint Pliers (#35661) with its locking handle to hold light weight mirror covers and small parts. The padded Grip ‘N Paint Pliers grip well and gives the technician the flexibility of holding the part vertically or horizontally to easily paint all angles preventing paint runs.

Grip ‘N Paint Pliers are specifically designed to fit into the two top slots of the Paint ‘N Stick with its molded guide and mounting screw will securely hold the clamp and components both vertically and horizontally. Powerful magnets included with the Paint ‘N Stick allows the technician to attach painted parts and traditional mirror assemblies to the wall of booth or hang it up for drying.

Labor/Material Savings: Saves up to 10 minutes of set-up time by eliminating the need to find creative ways to hold mirrors, covers and trim parts during the paint and drying operations improving quality of work.

High quality mini-files make removing dirt blemishes and runs in paint a breeze.

Steck's Paint 'N Stick is designed for holding and painting side mirror assemblies, outside mirror covers, as well as pinitng of other small and hard-to-hold parts. Powerful magnets allow the Paint 'N Stick to be attached to paint booth walls or other metal surfaces for easy part drying.

Grip ‘N Paint Pliers adjustable 6” flex clamp pliers with a locking handle to hold light weight mirror covers and small parts. The padded grip gives the technician the flexibility of holding the part vertically or horizontally to easily paint all angles preventing paint runs. Grip ‘N Paint Pliers are specifically designed to fit into the two top slots of the Paint ‘N Stick with its molded guide and mounting screw will securely hold the clamp and components both vertically and horizontally.

Quickly cover door locks for easy painting.

• Save Time Masking!
• Fits Many Cars!
• 12 Piece Set.

Get the most out of your work stand. Convert your portable bench to a painting stand.

• paint bumpers, fenders and other panels right on your workstand.
• Clamps can be removed and attached anywhere on any sized leg.
• Kit includes 2 easy mount metal clamps and two steel extension arms.

SAVE! When you buy our work stand combo!

A portable bench anywhere you need it! Handles up to 500 lbs.

• Capacity 500#
• 45" High X 38" Side, 1-¼" Tubing
• Adjustable for Different Heights!
• Folds for Storage
• Foam Rail Covers for Part Protection!

SAVE! When you buy our work stand combo!

A Tool Holding Cover For Your Portable Bench!

• Easy, installs in seconds with hook & loop strips
• Folds flat for storage
• Holds tools and parts during assembly and disassembly

SAVE! When you buy our work stand combo!

The Steck Work Stand Clamp is a simple and inexpensive plier to clamp a car door or other panel to a work stand quickly and securely.

The Work Stand Clamp secures a car door to a work stand (x-frame) in seconds by clamping on the inside frame of the door at the window opening. The welded ring of the clamp fits securely over the padded arm of the work stand (it can be adjusted to fit your stand). This method of clamping the door is far more ridged than current methods that are much more complex and expensive.

• Great for use with Steck #21890 Skin Zipper to hold car door in place on work stand (x-frame)
• Can also be used with other door skinning tools.
• By a pair for even more holding power
• Hold parts for prepping jams.

As Seen In The Skin Zipper Video, Featuring the Work Stand Clamp

3 inch by 4 inch spreaders. 50 to a box.

• Dispenser Hangs on the Wall!
• Visual Supply Check!
• Easily Dispenses One Spreader at a Time!
• Saves Lost Time Looking for Spreaders!

Sand, Mask, Prep & Paint Bumper Covers, Spoilers, Mirrors, etc.

• Tilt while painting to give easy access to top, bottom, front, back and wrap-around ends.
• Openings in covers can be painted from the front and back to assure complete coverage.
• Bumper Cover is secured by chains.  Chains are adjusted using convenient chain slots.
• Holds spoilers & fenders too.

See the Bumper Tree video

A bracket designed just to lift truck beds.

• Lift pick-up truck beds safely and easily
• Lifting bracket adjusts to evenly distribute weight

An adjustable stand that takes the frustration out of painting panels, hoods and doors.

• Panels load easily and quickly!
• Center Post design allows access to edge, bottom and both sides of the panel!
• Paint Panels, Jams, and Car all at one time!
• Save hours of dry time!
• Hold one or two panels securely!

See the Panel Tree video