TCP Global: automotive paint, restoration supplies, airbrushes, spray guns...

An air hammer driven door skinning tool that is easily affordable.

• Skins doors in less than 10 minutes.
• Saves arm fatigue and time.
• Replaceable head skins at least 10 doors.

See the Skin Zipper video

Steck's Paint 'N Stick Combo combines the capabilities of the Paint 'N Stick (#35660) for easy painting of traditional outside mirror assemblies with the adjustable 6 inch Grip 'N Paint Pliers (#35661) with its locking handle to hold light weight mirror covers and small parts. The padded Grip ‘N Paint Pliers grip well and gives the technician the flexibility of holding the part vertically or horizontally to easily paint all angles preventing paint runs.

Grip ‘N Paint Pliers are specifically designed to fit into the two top slots of the Paint ‘N Stick with its molded guide and mounting screw will securely hold the clamp and components both vertically and horizontally. Powerful magnets included with the Paint ‘N Stick allows the technician to attach painted parts and traditional mirror assemblies to the wall of booth or hang it up for drying.

Labor/Material Savings: Saves up to 10 minutes of set-up time by eliminating the need to find creative ways to hold mirrors, covers and trim parts during the paint and drying operations improving quality of work.

Handy Pull eye bolts allow you to pull hinges, etc. A hood hinge plate allows you to pull hood and deck lid hinges back into position.

KIT INCLUDES:

• Right Angle Pulling Plate
• 10mm Eye Bolt
• 8mm Eye Bolt
• 6mm Eye Bolt
• Hood Hinge Plate

Quickly access hard to reach damaged frame flanges, door an hood edges, as well as radiator supports to bring back proper edge alignment.

A unique double ended revers 1/4 inch hook design, made from hardened alloy steels, gives the technician easy access to buckled metal edges. A flat hook allows for easy manual alignment while the 35 degree angle bar allows technician to access areas like radiator supports. Flange Lever design allows for mulitple angles to gain hand clearance for fland and/or angled pulls while using the body of the tool to provide maximum leverage for manipulating the damaged flange or edge panel.

Quick movement along the damaged area allows for multiple metal manipulations without needing to unlock and relock locking pliers used today to perform flange repairs.

All the advantages of our regular Hatch Jammer, but with an extended reach of 59 inches! Also available, Xtension tube to convert your existing Hatch Jammer to an XL version.

Easily holds hatches open and secure for prep, paint, buffing and paintless dent removal!

• Easily adjusts the work angle
• Improves visibility of the work area
• J-hook attaches securely to striker and larger loop end locks into latch.
• Existing Hatch Jammer owners can buy the Xtension tube seperately to convert theirs to a Hatch Jammer XL
• Saves up to 10 minutes of set-up time
• Reduces back stress

Allows the technician to quickly grip studs (pull pins) and controll the dent pulling process as well as the accuracy of the pull.

• Accurate controlled pulls every time
• Grips studs (pull pins) quickly & easily
• Standard tool works on both 2.2 and 2.6 mm studs as close as 3/8" apart
• Black pivoting base helps compress crown as dent is pulled
• Includes STECK Straight Edge #20003 for matching original contours

Steck Manufacturing Company has released another winning tool: The Stud Lever (P/N 20014) will allow a technician to quickly grip studs (pull pins) and controlling the dent pulling process as well as accuracy of the pull.

A strong reinforced Nylon lever with pivoting base and self-locking stud capture mechanism allows the technician to quickly lock and lever studs while also compressing the crown area of the dent with the pivoting base. Adjustable pivot base on the Stud Lever allows one-handed operation and provides increased leverage, accuracy and reach for the pull and crown compression processes both vertical and horizontal, including roofs and lower rocker panels.

Stud Lever’s unique stud capture mechanism allows technician to quickly and easily capture both 2.2mm and 2.6mm studs as close as 3/8 inches apart.

Included with the Stud Lever is the Steck Straight Edge, part number 20003, which allows the technician to align the stud pull with the non-damaged metal area for accurate pulls on the initial pull which minimizes metal work and reduces the need for slide hammers.

Labor/Material Savings: Quick attachment to stud while combining leverage, accuracy and compression of crown area with the initial pull reduces the metal work in the dent repair process by 15 minutes per hour.

The Panel Shaper is an air hammer driven set of three self lubricating Nylon reinforced heads that allow the technician to easily access deep reach areas and badly deformed sheet metal surfaces to form them back to original shapes. Each kit contains three unique Nylon head shapes with arbors that allow each tool to be attached to your air hammer to fix body lines, concaved areas and flat surfaces.

1. Chisel Head - works with door, body lines, corner shaping and fender edges.
2. Rounded Head - straightens out wheel house and quarter panels
3. Flat Head - straightens out floors, trunk floors and provide stress relief in the repair process.

Using the Panel Shaper’s with your air hammer gives needed vibration along the damaged frame areas providing stress relief and molecular realignment in the frame structure. Panel Shaper kit also allows you to form custom shape patch panels and to fabricated panels. Heads can also be customized by grinding the head to any specific angle and shape required to perform the repair. In the typical repair processes each head should last 10 work hours.

Labor/Material Savings: Saves the technician arm fatigue and up to two hours of repair time over traditional hammer repair.

A snap-on accessory that fit ALL BigEasys. Provides an extra 12 in. of length to get to out-of-reach items. Glows in the dark!

Clips to any BigEasy to allow grabbing of door handles and locks. Glows in the dark!

90 degree end to easily separate hard-to-reach spot welded or bonded panels.

• Save up to 15 minutes per panel replacement.
• For quarter panels, rockers and any other pinchweld.
• Sharpened on two edges, the sharp end allows for penetration between panels and the side edge allows for side impact to drive the panels apart without damage.
• Super tough allow steel.
• Cushioned handle absorbs shock.

The Steck Work Stand Clamp is a simple and inexpensive plier to clamp a car door or other panel to a work stand quickly and securely.

The Work Stand Clamp secures a car door to a work stand (x-frame) in seconds by clamping on the inside frame of the door at the window opening. The welded ring of the clamp fits securely over the padded arm of the work stand (it can be adjusted to fit your stand). This method of clamping the door is far more ridged than current methods that are much more complex and expensive.

• Great for use with Steck #21890 Skin Zipper to hold car door in place on work stand (x-frame)
• Can also be used with other door skinning tools.
• By a pair for even more holding power
• Hold parts for prepping jams.

As Seen In The Skin Zipper Video, Featuring the Work Stand Clamp

The MIG Light allows you to light the area to be welded so that you can locate your torch where you need it before you strike an arc.

A large-diameter, easy push-on/push-off button can be actuated with your welding gloves on.

The MIG Light assists whether you are using a traditional or auto-darkening helmet.

Flexible mounting bracket attaches to the neck of standard (1/2" to 3/4") MIG welding torches.

The MIG's Light's focused beam saves time and frustration when welding out-of-position.

For pull pins and flanges. Pulls up to 2000 lbs.

• Grip and pull multiple pull pins studs and vertical or horizontal flanges.
• 3.5 inch jaw provides evenly distributed pulling force while pulling multiple pull pins or flanges.
• 2 large pulling rings for light pulling (up to 2,000 lbs.)