| |
SEM - Door Skin & SMC Adhesive:
- bonds to door skin frames without welding.
- Bonds SMC to SMC and metal space frames.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
 |
| 25-30 Min |
1 Hour |
24 Hours |
1 Hour |
|
| |
SEM - Multi-Purpose Panel Adhesive:
- Superior impact strength.
- Bonds steel, aluminum, SMC and fiberglass panels.
- Glass beads for bondline control.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 60-90 Min |
4 Hours |
24 Hours |
1 Hour |
|
| |
SEM - Patch Panel Adhesive:
- Bonds patch panels to steel, aluminum and galvanized steel.
- This revolutionary fast-set acrylic does not leave an after tack or waxy feel when fully cured.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 5-10 Min |
15-20 Min |
30 Min |
15 Min |
|
| |
SEM - Non-Sag Fast Set Adhesive:
- Provides fast bonds for backing materials on most plastics.
- With a fast set up time, 39907 is perfect for adhering backer strips when replacing sections of SMC and fiberglass.
- 39907 has the ability to bond a good cross section of substrates, giving bodyshops another much needed quick-setting adhesive.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 2-3 Min |
5-7 Min |
45-60 Min |
15 Min |
|
| |
SEM - Quick Set 20:
- Quick Set 20 is an opaque, fast curing urethane adhesive designed for automotive plastic repair.
- With a 20 second work time, Quick Set 20 is an excellent choice for quickly repairing bumper brackets, tabs, headlight buckets and grills.
- It may also be used for bonding backer panels, moldings emblems and most small plastic, metal and aluminum parts.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 15-30 Sec |
< 5 Min |
45-60 Min |
N/A |
|
| |
SEM - Quick Set 50:
- Quick Set 20 is an opaque, fast curing urethane adhesive designed for automotive plastic repair.
- With a 20 second work time, Quick Set 20 is an excellent choice for quickly repairing bumper brackets, tabs, headlight buckets and grills.
- It may also be used for bonding backer panels, moldings emblems and most small plastic, metal and aluminum parts.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 45-60 Sec |
< 5 Min |
45-60 Min |
N/A |
|
| |
SEM - Weld-Bond Adhesive:
- Exceeds FMVSS 208 requirements.
- Used to replace automotive Quarter panels, door panels, roof skins, box sides, van sides and other body sheet metal. Welding is recommended.
- Glass beads for bondline control.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 45-60 Min |
2-3 Hours |
24 Hours |
1 Hour |
|
| |
SEM - PLASTIC ADHESION PROMOTER:
- Promotes adhesion to problem plastics such as PP or TPO repair materials and topcoats.
- Works equally well on most flexible or rigid plastics and on painted surfaces.
|
| |
SEM - XXX Adhesion Promoter:
- Promotes adhesion of topcoat materials when repairing or refinishing interior and exterior automotive surfaces.
- It may also be used on a variety of materials including flexible and rigid problem plastics, aluminum and metal.
|
| |
Fillers:
|
| |
SEM - Problem Plastic Repair Material:
- Bonds to polypropylene, EPDM, TPO and similar substrates.
- Takes the “problem” out of plastic repair.
- Excellent sanding and feather-edge characteristics.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 3-5 Min |
5-10 Min |
15-20 Min |
1 Hour |
|
| |
SEM - Flexible SEM Weld:
- Repairs urethane and other plastic parts such as PUR, RIM and TPUR.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 3-5 Min |
5-10 Min |
15-20 Min |
1 Hour |
|
| |
|
Sealers:
|
| |
SEM - Seam Sealer:
- Retains its flexibility and does not shrink, harden or crack when used to seal interior or exterior seams, joints or voids.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 5-10 Min |
15-20 Min |
30 Min |
1-2 Hours |
|
| |
| |
SEM - Self Leveling Seam Sealer:
- Designed for use on drip rails, trunk seams and roof channels.
- Paintable in 30 Minutes
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 5-10 Min |
15-20 Min |
30 Min |
1-2 Hours |
|
| |
SEM - High-Build Self Leveling Seam Sealer:
- Offers building characteristics that reduce running normally found in other self-leveling seam sealers.
- Seals interior and exterior joints and voids. Paintable in 30 minutes.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 5-10 Min |
15-20 Min |
30 Min |
1-2 Hours |
|
| |
SEM - Sound & Seal Sprayable Coating:
- For use under rocker panels and frame rail sections, trunk floor sections, inner wheel openings and floor pans.
- Retains flexibility, will not shrink, harden or crack.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 10-15 Min |
20-30 Min |
30 Min |
24 Hours |
|
| |
SEM - Flexible Urethane Foam:
- Fills voids and duplicates OEM foams without warping panels.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 15-25 Sec |
1-2 Min |
N/A |
N/A |
|
| |
SEM - Rigid Urethane Foam:
- Fills pillars, posts, box sections and areas around gas tank filler necks. Duplicates rigid OEM foams.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 15-25 Sec |
1-2 Min |
N/A |
N/A |
|
| |
SEM - Panel Vibration Control Material:
- Reduces noise and vibrations in areas where foams cannot be used.
| Working Time |
Set Time |
Cure Time |
Heat Cure Time |
|
| 45-60 Min |
2 Hours |
N/A |
24 Hours |
|
| |
|
Applicator / Dispensing Guns:
|
| |
SEM - 7oz. Dual-Mix Applicator Gun:
- Dispenses material quickly and consistently. Ergonomic design for easy handling during repairs.
- Dispenses 7 OZ 1:1 ratio Cartridges quickly and consistently with over 400 pounds of thrust.
- Balanced design minimizes fatigue.
|
| |
SEM - 1.7oz Manual Applicator Gun:
- 1.7oz Manual Applicator Gun is an easy loading applicator for dispensing 1.7oz Dual-Mix cartridges.
- Material is dispensed quickly and consistently.
|
| |
SEM - 7oz. Pneumatic Dispensing Gun:
- Delivers material quickly and consistently with over 400 pounds of thrust.
- Its lightweight, balanced design means less fatigue when sealing long seams or bonding large panels.
|
| |
SEM - 2:1 Pneumatic Dispensing Gun:
- Dispenses easily with over 400 pounds of thrust.
- Smart design with reverse air.
- Allows for quick Cartridge changes and greater productivity.
|
| |
|
Repair Products:
|
| |
SEM - Flexible Polyester Glaze:
- Fills small imperfections on PUR, RIM, TPE, TPUR and metal.
|
| |
SEM - No Swell Plastic Panel Filler:
- Used for cosmetic or structural repair of SMC, FRP, HPA and PPO/PA.
|
| |
SEM - Carbo-Fill:
- Is a carbon fiber enriched formula that offers exceptional cosmetic and structural repair for SMC, FRP, HPA and PPO/PA.
|
| |
SEM - Metal Bite Finishing Glaze:
- A two component polyester finishing glaze designed to be applied over body filler, sand scratches, and other minor imperfections.
- This product prevents staining over body filler, seals the repair area and adheres to a variety of substrates including aluminum, steel, SMC and fiberglass.
|
| |
SEM - 1oz. Hardener:
- Used with 39127, 39458, 39492 and 39542.
|
| |
SEM - Beige Seam Sealer:
- BEIGE SEAM SEALER is a versatile, two component sealer for sealing interior or exterior seams, joints or voides.
- It stays flexible and is paintable in 30 minutes.
|
| |
SEM - Insta-Bond 2 Component kit:
- This kit is used to replace tape and clamps, temporarily holding most plastics in place while completing repairs.
- The INSTA-BOND ACCELERATOR speeds the curing process.
|
| |
SEM - Leather & Vinyl Repair Compound:
- A unique compound that successfully repairs cuts and abrasions on leather or vinyl.
- This product has exceptional strength, flexibility and can also be used to fill minor imperfections.
- SEM LEATHER & VINYL REPAIR COMPOUND works effectively on leather and vinyl substrates to create a durable and long lasting repair.
- This product is packaged in an easy-to-use tube, which helps to prevent waste and is a great value for any shop!
|
| |
SEM - Plastic Repair Tape:
- Holds repair material in place while curing.
- This fiberglass mesh will maintain and improve the structural integrity of the repair.
- Works with all SEM repair materials.
|
| |
SEM - Integral Nut Square Static Mixers:
- Ensures proper mixing ratios for DUAL-MIX products.
- 70011/70012 come standard with all DUAL-MIX products except 39997
|
| |
SEM - 1.7 OZ. Turbo Mixers:
- Ensures proper mix ratios for 1.7 oz DUAL-MIX cartridges.
|
| |
SEM - 7oz. Long Dual-Mix Static Mixers (for 39997), 50 pack:
|
| |
SEM - Bonding Adhesives:
- SEM 68422 - Bumper Repair, 1oz. Cartridge: Bonds to most automotive bumpers and problem plastics.
- SEM 68432 - General Purpose Adhesive, 1oz. Cartridge: Bonds to a variety of substrates.
- SEM 68442 - Clear Fast Set Adhesive, 1oz. Cartridge: Provides fast bonds to a variety of substrates.
|
| |
| |
|
| |