POR-15® is a high-tech, high performance rust-preventive coating designed for application directly on rusted or seasoned metal surfaces. It dries to an incredible rock-hard, non-porous finish that won't chip, crack, or peel, and it prevents rust from recurring by protecting metal from further exposure to moisture. Use it to coat rusty frames, floor pans, farm equipment, marine equipment, or even a heavily corroded battery tray. POR-15® is sensitive to UV light (sun) and must be topcoated for prolonged exposure to sunlight. Topcoating is not required for areas not exposed to sunlight.

Click a part number to buy.

MARINE-CLEAN™ cleans and degreases in one application without leaving residues, noxious fumes or flammable solvents. No other cleaner works as fast or as well. It makes petroleum-based cleaners almost obsolete because MARINE-CLEAN™ can be diluted with water up to 3, 4, 5 and even 10 times its volume while remaining more potent than other cleaners.

MARINE-CLEAN™ removes grease, oil, mildew, algae, musty odors, soap films, wax. Use it to clean canvas, vinyl, nylon, holding tanks, grease traps, auto parts and more.

METAL-READY® provides the best adhesion for POR-15® on any surface, including aluminum and shiny polished metal surfaces. Our simple process gently etches metal, creating an ideal anchor pattern for coatings such as POR-15®, while simultaneously leaving a zinc phosphate coating to insure chemical bonding of paint and steel. Avoid other preps that may leave harmful residues which prevent proper adhesion.

After thoroughly degreasing your work piece, apply environmentally safe METAL-READY® to both neutralize any rust and etch any clean bare metal. This will allow better adhesion of POR-15® or any other paint. METAL-READY® is not caustic, corrosive, toxic or flammable.

Especially formulated for easy cleanup or thinning of POR-15.

Click a part number to buy.

"Unbelievable", that's what restorers say when they see a demonstration of this incredible EPOXY PUTTY product.

It's so strong you can drill and tap it, yet gentle enough that you can apply it with your bare fingers.

And since it's WATER BASED, you can simply wet your fingers, and work with it until it is almost perfectly smooth before it dries - eliminating most sanding! But when it cures, it's ROCK HARD, making it perfect for repairing steel, plastics, concrete, etc. Amazingly, it even sticks to damp surfaces, and will cure UNDERWATER, so it can be used to fix leaking basement walls, swimming pools, plumbing fixtures and so much more. Put some EPOXY PUTTY in your toolbox today. You'll find yourself using it all over your shop and home.

POR PATCH™ is, quite literally, POR-15® in a tube, and like POR-15® it dries as hard as a rock, remains flexible, and once dry is totally impervious to fuels and solvents.

POR-STRIP® Paint Remover/Stripper is a clear spray-on remover with the consistency of water. In sample testing, our POR-STRIP® was the choice of professional auto strippers. A special chemical-resistant spray bottle allows you to use less and finish faster than brushing. Remove any coating from any surface without damaging window glass, chrome, or weatherstrip. POR-STRIP® is non acidic and will not harm aluminum or factory fiberglass.

Designed exclusively for use with our great GLISTEN PC™ clearcoat, AP-120 prep guarantees perfect adhesion of GLISTEN PC™ to any metal surface, especially chrome or polished aluminum, where good adhesion is often difficult to achieve. AP-120 is non-flammable with no noxious fumes. Wear rubber or latex gloves when using.