POR-15, Complete Kits and Related Products

Dress Up Your Calipers!

Nothing ruins the appearance of a sharp set of wheels like dirty, corroded calipers lurking from behind.

Now dress up those steel or aluminum calipers with a super-tough durable finish that will make your car or truck look terrific. Our new caliper paint is beautiful in appearance, and strong enough to withstand the punishment of road debris and temperature extremes. And it looks terrific on any car or truck. Then, whenever your calipers get covered with dirt and brake dust, clean them with anything you like; the POR-15® Caliper Paint™ will stand up to just about anything.

Kit Contains: (1 qt) Caliper Cleaner, (8 oz) Caliper Prep, (4 oz) POR-15 Rust Preventive Paint, (8 oz) Caliper Paint, 1 Roll Masking Tape, 2 Pair Gloves, 2 Foam Brushes, Directions to do the job right

Available in 5 colors: Black, Blue, Red, Silver and Yellow.

POR-15® created the SUPER STARTER KIT in response to requests from customers anxious to try out the entire 3-step rust-stopping system, as well as those customers who need to cut oily residue on the metal they plan to paint.

You'll get a 4 oz. can of POR-15® (enough to cover 12 square feet), a half-pint of METAL-READY™, two wooden handle paint brushes, and a pair of high-dexterity surgical latex gloves, PLUS an 8-ounce bottle of MARINE-CLEAN™, the world's greatest WATER BASED degreaser.

POW-R-LINER™ Truck Bed Coating is a spray-on system that creates a tough, moisture-resistant, non-slip coating. Standard drop-in bedliners trap moisture under the liner, promoting rust and corrosion. In addition, their plastic surface can be slippery and subject to cracking and tearing. Unlike these drop-in liners, POW-R-LINER™ bonds directly to the surface and will not chip or peel, and most importantly, will keep out rust! POW-R-LINER™'s easy spray-on system gives you the ability to customize the texture and achieve professional-looking results. POW-R-LINER™ is engineered to be applied on top of POR-15® Rust Preventive Paint for the ultimate in protection. (Rust, salt and temperature resistant)

FUEL TANK REPAIR is more than just pouring in a quart of sealer and sloshing it around. If gum, varnish, sludge, or fuel are inside, they must be removed first.

Our U.S. STANDARD TANK SEALER™, like all other sealers, will not work in a contaminated tank. Find out what the pros already know... our FUEL TANK REPAIR KIT has everything you need to do the job right!

Each Kit Contains:

• MARINE CLEAN™ to remove gum, sludge, varnish
• METAL READY™ to remove rust & prepare tank for sealer
• U.S. STANDARD TANK SEALER™ to permanently seal tank
• FUEL PRESERVATIVE & STABILIZER™ to keep the fuel system trouble-free
• DETAILED INSTRUCTIONS so you'll do the job right.

UTILITY & CYCLE FUEL TANK REPAIR KITS have been designed
for the special needs of bikes and other small fuel tanks such as
recreational vehicles, snowmobiles, outboards, generators, etc.
Order a UTILITY & CYCLE FUEL TANK REPAIR KIT today, and
experience its quality and durability for yourself!

Each Kit Contains:

• MARINE CLEAN™ to remove gum, sludge, varnish
• METAL READY™ to remove rust & prepare tank for sealer
• U.S. STANDARD TANK SEALER™ creates a permanently sealed tank
• CLOTH PATCH for sealing large holes or reinforcing weak areas
• BRUSH for applying patching system to exterior of tank
• DETAILED INSTRUCTIONS to take you easily through each step of tank restoration

For those unfortunate customers who have had bad results from other inferior fuel tank sealers, we have developed the all new "HEAVY DUTY UTILITY & CYCLE TANK REPAIR KIT."

featuring everything found in our regular UTILITY & CYCLE TANK REPAIR KIT, PLUS a quart bottle of our famous Tank Strip to first remove that inferior coating that failed you.

Order one today or give us a call with any questions.

Buy this terrific kit and your shopping is done! It has everything you need to do a superior job, and includes the step-by-step instructions needed to make sure you do it right, especially if you're a beginner. First, our special MARINE CLEAN engine cleaner gets rid of all dirt, grease and oil. Next, use our METAL-READY™ to dissolve rust and prep the metal. Now prime and rust-proof your engine with regular POR-15 ® (black or silver). And lastly, topcoat with the extra-pigment Engine Enamel color of your choice, all in one convenient kit. You won't believe the job you've done... PERMANENTLY!

Each Kit Contains:

• POR-15® SOLVENT
• MARINE CLEAN
• METAL-READY™
• POR-15® (Black or Silver pending on Engine Enamel color choice)
• ENGINE ENAMEL™ (your choice of Black or Orange)
• Paint Brushes
• Safety face mask
• Latex surgical gloves

You'll save hundreds of dollars over replacement... and your restoration will be better than replacement because you'll never see rust again, whether it's a daily driver or a show car. You can maintain the integrity of the structure with no ugly welded seams. Our easy step-by-step instructions make it simple to restore floor pans, trunk pans, pickup truck beds, etc. You'll be amazed how complete it is... Everything you need is at your fingertips. Order your kit today!

KIT CONTAINS: MARINE-CLEAN™ Metal cleaner, METAL-READY™ Metal Prep, Power Mesh Fabric, POR-15® Silver, POR-15® Black, EPOXY PUTTY, CHASSISCOAT BLACK™, POR-15 SOLVENT®, All brushes needed (4), Safety face mask, Latex gloves, Dispensing scoop, Detailed instructions

Now, seal your floor permanently, with all-new Floor Armor™ floor painting kits, from the makers of POR-15.

No need for acids; no need to flood your floor with water. Just use our easy degreaser on any heavy oil or grease stains, vacuum away any dust or dirt, and paint right over everything with Floor Armor. Get the same fantastic results you have come to expect from world-famous POR-15 Rust Preventive Paint, with this terrific new product. It is the result of several years of development by our own chemists and product specialists.

Use Floor Armor in heavy traffic areas. It can take the abuse from forklifts, floor jacks, and constant traffic. Once your floor is covered with Floor Armor, you'll wipe up oil and grease stains with a rag, and keep dust down too.

WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

This great kit contains everything you need to clearcoat your garage or basement floor, including the decorative vinyl chips that hide imperfections in the concrete and add beauty to any floor with our simple-to-follow instructions.

WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

Floor Armor™ Concrete patching/Repair Kit is an advanced self-leveling patching compound engineered to repair and fill concrete surfaces that will be coated with POR-15 Floor Armor. It permanently penetrates and bonds to concrete and provides structural and decorative patching, resurfacing and restoration by filling cracks and missing sections of concrete.

only Unknown

WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

CHIPS: Our solid vinyl chips will remain flat and range in thickness from 4 to 6 mils. Colorfast and resist ultraviolet degradation.

GALLON - COLOR: This incredible coating is highly resistant to chemicals, abrasion, heat, and impact. Outperforms water-based epoxies in all these critical areas with POR-15 proven urethane technology. Polydigital adhesion is unsurpassed in multi-cellular mediums like concrete. Long pot life.

GALLON - CLEAR: This rock-hard clearcoat finish has the same excellent resistance to chemicals, abrasion, heat, and impact that our Floor Armor Coating has. It also permanently seals in our beautiful decorative chips. Easily outperforms epoxies in durability and adhesion. We recommend POR-15 No-Slip Aggregate (standard in every kit) to avoid slipping when floor is wet. Long pot life.

GREASE & OIL REMOVER: Neutralizes grease & oil stains and lets Floor Armor penetrate and lock into microcellular structure of cured or aged concrete with Polydigital penetrating action.

NON SLIP AGGREGATE: Provides a small separation between your shoe and the floor on a wet surface permitting water to escape and preventing hydroplaning (or slipping). Mix 1 lb. to 1 gal. Floor Armor.