Body Shop Supplies
Auto Paint Accessories
Add to Your Order
From Any of our Sites:
SHIPPING DISCOUNT
On qualifying $300 Orders
(See how easy to qualify)
SHIPPING DISCOUNT
on qualifying orders
Click here for more information
NO HAZMAT fees
on Ground shipments!
| Cart Total |
|
|
| Subtotal: |
$0.00 |
| Tax: |
$0.00 |
| Total: |
$0.00 |
|
View Cart |
|
|
|
|
|
|
|
|
 |
|
|
| |
BODY HAMMERS |
Part# MRT 150G
Dinging Hammer with a Hickory Wood Handle
 For fender and high-crowned panel dinging or bumping. Both high and low-crown faces for “on or off dolly†work.
Faces, 1-1â„4″ and 1-9â„16″. Round heads, 6″ overall. Weight 1.04 lbs. |
Part# MRT 150FG
Dinging Hammer with a Fiberglass Handle
For fender and high-crowned panel dinging or bumping. Both high and low-crown faces for “on or off dolly†work. Martin Fiberglass Handles offer greater strength, longer life and minimal shock.
Faces, 1-1â„4″ and 1-9â„16″. Round heads, 6″ overall. Weight 1.04 lbs. |
 Body and Pick Hammers
Only Martin Hammers have the time tested good balance, and proper weight and clearances to speed and simplify repairs.
Martin Hammers are forged from special alloy steel. Handles are of tough second growth Hickory and fiberglass shaft with cushion grips.
Martin Fiberglass Handles offer greater strength, longer life and minimal shock.
Only Martin provides this added warranty:
If a hammer should loosen at any time, return it for handle replacement or a new hammer.
|
| Type |
Image |
Description |
Wood
Handles |
Fiberglass
Handles |
DINGING
HAMMER
|
|
For fender and high-crowned panel dinging or bumping. Both high and low-crown faces for “on or off dolly†work. Faces, 1-1â„4″ and 1-9â„16″. Round heads, 6″ overall. Weight 1.04 lbs. |
150G
|
150FG
|
DINGING
HAMMER
|
 |
For light dinging and long reach. Square face permits dinging close to molding or beading. Faces, 1-1â„4″ round, 1-1â„16″ square head 6″ overall. Weight .85 lbs. |
151G
|
—
|
HIGH
CROWN
CROSS
PEEN HAMMER
|
 |
Two high-crowned faces for concave surfaces on doors, rear quarter panels, fenders and hoods. Faces 1-1â„8″, 6″ overall. Weight 1.02 lbs. |
152G
|
—
|
CROSS
CHISEL
HAMMER
|
 |
Excellent for finishing. Cross peen used for working in sharp corners around moldings and for caulking. Round face — 1-9â„16″ diameter. Chisel — 3″ long. Weight .87 lbs. |
153G
|
153FG
|
CURVED
CROSS CHISEL
HAMMER
|
 |
Excellent for finishing. Cross peen used for working in sharp corners around moldings and for caulking. Well balanced curved chisel for work in close places. Round face — 1-9â„16″ diameter. Chisel — 3″ long. Weight .85 lbs. |
153GB
|
153FGB
|
CROSS CHISEL
SHRINKING
HAMMER
|
 |
Cross grooved. Extra wide faces are cross grooved and used for shrinkage on large surfaces — chisel end used on sharp corners. Flat round face — 1-9â„16″ diameter. Chisel — 3″ long. Weight .87 lbs. |
153S
|
—
|
BENT
VERTICAL CHISEL
HAMMER
|
 |
Excellent for finishing. Vertical chisel is bent for working in sharp corners, around moldings and for caulking. Round face — 1-1â„2″ diameter. 5â„8″ Chisel — 5-1â„2″ long. Weight .85 lbs. |
154G
|
154FG
|
VERTICAL CHISEL
SHRINKING
HAMMER
|
No Image Available |
Cross grooved. Extra wide faces are cross grooved and used for shrinkage on large surfaces — vertical chisel end used on sharp corners. Round face — 1-1â„2″ diameter. Chisel — 5-1â„2″ long. Weight .87 lbs. |
154S
|
154SFG
|
FENDER
BUMPER
|
 |
For bumping where hand and dolly cannot reach. Ample clearance for obstructions. Also used as a caulking iron. Length of head, 8-3â„4″. Weight 2.8 lbs. |
155G
|
155FG
|
PICK
HAMMER
|
 |
Long-reach, thin point for low spot on low-crown panels. Reaches over inner obstructions. Face, 1-1â„4″ round point, 1â„32″ radius. Length of pointed end, 5-1â„2″. Weight .91 lbs. |
156G
|
156FG
|
CURVED
PICK
HAMMER
|
 |
Like 156G except pick end is bent in arc of normal blow. Reaches behind reinforcements to difficult spots. Face, 1-1â„4″ round point, 1â„32″ radius. Length of pointed end, 5-1â„2″. Weight .86 lbs. |
156GB
|
—
|
GENERAL
PURPOSE
PICK
HAMMER
|
 |
Medium size point and reach for general work. Low crown strawberry point for perfect balance. Face, 1-9â„16″ round point, 3â„32″ radius. Length of pick end, 3-3â„4″. Weight .91 lbs. |
158G
|
158FG
|
ROUND
POINT
FINISHING
HAMMER
|
 |
Blunt point — long reach. For low spots on high crown panels and other work with long reach. Will not pick holes in the metal. Round face — 1-9â„16″ diameter. Blunt point 3″ long. Weight .81 lbs. |
158GM
|
158FGM
|
SHARP
POINT
FINISHING
HAMMER
|
 |
Sharp point — long reach. For low spots on high crown panels and other work with long reach. Round face — 1-9â„16″ diameter. Sharp point 3″ long. Weight .79 lbs. |
158GMS
|
—
|
HEAVY DUTY
BUMPING
HAMMER
|
 |
For heavy gauge truck fenders and panels. Also used in straightening reinforcements, braces, etc. Faces, 1-1â„4″ round and 1-3â„16″ square head, 4″ overall. Weight 1.1 lbs. |
160G
|
160FG
|
DINGING
HAMMER
|
 |
Short-reach, lightweight. One low-crown, square face. Lightest dinging hammer in line. Faces, 1-1â„4″ round and 1-3â„16″ square. Head, 4″ overall. Weight .83 lbs. |
161G
|
160FG
|
SHRINKING
HAMMER
|
 |
For work in close quarters. Expertly machined serrations on the round face. Plain square face, 1-1â„8″. Round serrated face, 1-1â„4″. Diameter 4″ overall. Weight .78 lbs. |
162G
|
162FG
|
UTILITY
PICK
HAMMER
|
 |
Blunt point, short reach. For low spots in high-crown panels and other work with small clearance. Face, 1-9â„16″ round point, 5â„32″ radius. Length of pointed end, 2″ head, 4″ overall. Weight .75 lbs. |
164G
|
164FG
|
PICK
HAMMER
|
 |
Lightweight. Provides stubby pick point and highcrown peen-type faces. Will ding out small dents in high fins. No need to remove panels. Long reach, 18″ handle. Weight 5 oz. |
165G
|
—
|
PICK
HAMMER
|
 |
Lightweight. Provides stubby pick point and highcrown peen-type faces. Will ding out small dents in high fins. No need to remove panels. 12″ handle. Weight 4 oz. |
166G
|
—
|
CROSS PEEN
FINISHING
HAMMER
|
 |
Used to bump odd fender or bumper contours. Round face — 1-9â„16″ diameter. Peen end 3â„16 × 7â„8″. 5″ overall head length. 12″ handle. Weight .91 lbs. |
168G
|
168FG
|
HIGH CROWN
CROSS PEEN
FINISHING
HAMMER
|
 |
Ideal for forming radiuses, contours and curves – restoration, bike tank. High Crown face — 1-9â„8″ dia meter, 2-1â„4″ radius. Peen end 3â„16″ × 1″. 5″ overall head length. 12″ handle. Weight 1.0 lbs |
168HC
|
168HCFG
|
LARGE FACE
PICK
FINISHING
HAMMER
|
 |
For finishing and caulking. Round face — 1-7â„8″ diameter. 4-1â„2″ overall head length. 12″ handle. Weight 1.0 lbs. |
169G
|
169FG
|
DOOR
SKIN
HAMMER
|
 |
For high crown work and finishing, without poking holes in thin sections. 6-1â„2″ overall length. 12″ handle. Weight .94 lbs. |
170G
|
170FG
|
| Type |
Image |
Head
Weight |
Overall
Length |
Head
Length (A) |
Head
Width (B) |
Face
Width (C) |
Replacement
Handle |
Part
No. |
TINNERS
RIVETING
HAMMERS
|
 |
Octagonal head with flat striking face and rounded cross peen.
For driving & setting rivets and general sheet metal forming.
|
|
4 oz.
|
9 1â„4″
|
3 11â„16″
|
9â„16″
|
15â„16″
|
HH50
|
25G
|
|
8 oz.
|
11
|
4 1â„4″
|
3â„4″
|
21â„32″
|
HH53
|
26G
|
|
12 oz.
|
13 1â„2″
|
4 3â„4″
|
29â„32″
|
25â„32″
|
HH801
|
27G
|
|
1 lb.
|
14
|
5 1â„8″
|
31â„32″
|
27â„32″
|
HH801
|
28G
|
FIBER-GLASS
REPLACE-MENT
HAMMER
HANDLES
|
 |
1 lb. and 11â„4 lb. Ballpeen - G Series 13″ Length
|
HH105106FG
|
|
1 1â„2 lb. Ball Peen - G Series 14″ Length
|
HH107FG
|
2 lb. Ball Peen - G Series 16″ Length &
155FG Fender Bumper
|
HH108FG
|
|
2 1â„2 lb. and 3 lb. Ball Peen - G Series 16″ Length
|
HH109110FG
|
|
1 1â„2 lb. Brick Hammer 12 1â„2″ Length
|
HH173FG
|
|
All Body Hammers with 12†Handle Length
|
HHBFFG
|
HICKORY
REPLACE-MENT
HAMMER
HANDLES
|
 |
Hickory Handle for 155G Fender Bumper
|
HH45
|
|
Hickory Handle for 165G Pick Hammer
|
HH42A18
|
|
Hickory Handle for all other Body Hammers
|
HH42B
|
|
| |
PICKS |
| Type |
|
Description |
Part No. |
MEDIUM
CURVED
PICK |
 |
Medium length. Curved and pointed. Use
twisting or prying action. Length 261⁄2″.
Weight 2.2 lbs. |
1106 |
LONG
CURVED
PICK |
 |
Long length. Curved and pointed. Use
twisting or prying action. Length 31″.
Weight 2.5 lbs. |
1107 |
LONG
CHISEL
BIT PICK |
 |
Heavy duty. Employ twisting action. Chisel
bit 1″. Length 20″. Weight 1.9 lbs. |
1109 |
SHORT
CURVED
PICK |
 |
Extremely short length. Curved and pointed.
Use twisting or prying action. Length
12″. Weight .5 lbs. |
1110 |
MEDIUM
SHORT
CURVED
PICK |
 |
Short length. Curved and pointed. Use
twisting or prying action. Length 18″.
Weight .7 lbs. |
1111 |
LIGHT
CHISEL
BIT PICK |
 |
Light duty. Employ twisting action. Chisel
bit 11⁄16″. Length 16″. Weight .7 lbs. |
1112 |
|
| |
BODY & FENDER REPAIR TOOLS: DOLLY BLOCKS |
Part# MRT 1057
Light Weight Toe Dolly for Body and Fender Repair
 Designed for flat surfaces. All the features of a toe dolly.
Sizes 4-3â„4″ × 2-1â„4″ × 1-1â„16″. Weight 1.8 lbs. |
Dolly Blocks for Body and Fender Repair
The Dolly Blocks are forged which provides extra density.
They are forged using USA alloy Steel.
The extra finishing ensures a long lasting work surface.
|
| Type |
 Image |
Description |
Part No. |
LIGHT WEIGHT
TOE DOLLY
|
|
Designed for flat surfaces. All the features of a toe dolly. Sizes 4-3â„4″ × 2-1â„4″ × 1-1â„16″. Weight 1.8 lbs. |
1057
|
TOE
DOLLY
|
|
Thinness and length provide easy accessibility to narrow pockets. Large, flat face is frequently used in shrinking and dinging flat panels. The flat sides furnish a convenient anvil for repairing flanges. Sizes 4-3â„4″ × 2-3â„8″ × 1-1â„8″. Weight 3.0 lbs. |
1058
|
SHRINKING
DOLLY
(SERRATED)
|
|
Shaped like a toe dolly but has one face covered with raised serrations for shrinking metal stretched by dents. Weight 3.4 lbs. |
1058S
|
HEEL
DOLLY
|
|
Design makes it possible to reach easily into sharp corners and wide radii. These features are exclusive to the Heel Dolly and continue its high demand. Sizes 3-1â„4″ × 2-1â„2″ × 1-7â„16″. Weight 2.7 lbs. |
1059
|
GENERAL
PURPOSE
DOLLY
|
|
Provides convenient and comfortable hand hold during heaviest blows. Weight, balance and several differently crowned working faces, together with two beading and flange lips, give this dolly broad general use. Sizes 2-7â„8″ × 2-3â„8″ × 2-1â„4″. Weight 3 lbs. |
1060
|
UTILITY
DOLLY
|
|
High-crown dolly with one narrow beading edge. Thick rounded sides are useful in short radii curves. Wide application of uses in high-crown portions of hoods, fenders and body panels. Sizes 3-1â„8″ × 3″ × 1-5â„8″. Weight 2.9 lbs. |
1061
|
EGG
SHAPED
DOLLY
|
|
This unique shape with high crown design is a very popular shape, with many different curves and angles. Sizes 1-5â„8″ × 2-1â„2″ × 3-3â„4″. Weight 3.1 lbs. |
1064
|
LIGHT
WEIGHT
WEDGE
DOLLY
|
|
Short, slender general purpose dolly. Good hand grip. Also used for beads or flanges on fenders. thin edge is useful for corners and beading. Flat side works under long curve of fender. Sizes 2-7â„64″ × 2-1â„2″ × 4-27â„64″. Weight 2.7 lbs. |
1065
|
WEDGE
DOLLY
|
|
Long, slender general purpose dolly. Widely favored by many body repair men for all-around use. The long, Thin Lip is very useful in working behind reinforcements. Sizes 5-3â„4″ × 2-3â„8″ × 2-3â„16″. Weight 4 lbs. |
1067
|
LOW
CROWN
DOLLY
|
|
Specially designed for use on low-crown panels where medium and high-crown dollies would stretch the metal. Angle between the sides and large face is less than 90°, which permits this dolly to reach into the corner of a flanged edge. Size 3-7â„8″ × 2-3â„4″ × 1-5â„8″. Weight 3.3 lbs. |
1068
|
“CHAMPIONâ€
HEAVYWEIGHT
DOLLY
|
|
Heavy duty, general purpose fender dolly. A necessity on heavy gauge fenders which resist the blows of lighter dollies. Brings out the toughest damage. Seats comfortably in the hand and protects fi ngers from a swinging blow. Sizes 3-3â„8″ × 3-3â„8″ × 2-11â„16″. Weight 4.6 lbs. |
1070
|
|
| |
BODY & FENDER REPAIR TOOLS: BODY SPOONS |
Body Spoons for Body and Fender Repair
The Body Spoons are forged which provides extra density and strength for the spoons. They are forged using USA alloy Steel.
The extra finishing ensures a long lasting work surface.
|
| Type |
 Image |
Description |
Part No. |
LIGHT
DINGING
SPOON
|
|
To ding ridges smooth and level. When held against ridge and struck with hammer, spreads blow over large area making smooth job and preventing damage to metal or fi nish. Not made for prying. Length 10″ overall. Face 2″ × 4-5â„16″. Weight .50 lbs. |
1036
|
COMBINATION
SPOON
|
|
General purpose fender spoon. Used as dolly behind brackets, inner panels and similar places. Handle offset to give balance when dinging and for long reach. Has high-crown working surface. Face 1-3â„4″ × 5-1â„2″. Handle 1″ octagon 4-3â„4″ long. Weight 3.0 lbs. |
1050
|
SPOON
DOLLY
|
|
Long handle permits many uses in places otherwise inaccessible. Can be driven between reinforcements and outer panel, then used to pry outward as the metal is dinged. Excellent forming and caulking tool for the deep pockets of doors, quarterpanels, rear fenders and lower trunk panels. Size 2-1â„2″ × 1″ × 3″. Weight 4.2 lbs. |
1052
|
LONG
CURVED
SPOON
|
|
Long, thin, curved blade is handy for prying up dents behind curved reinforcements in header panels, hinge anchors in doors, body pillars and reinforcements in hoods and radiator shells. Length 10-1â„2″ overall. Face 2″ × 7″. Weight 1.5 lbs. |
1054
|
WING-DING
SPOON
DOLLY
|
|
The answer to repair problems on high fins. A dolly, a spoon, a pry. Long handle and special contours for working up inside cramped fi ns. Wide spoon transmits hammer blows over wide area without damaging finish. 1″ handle diameter, 19″ overall length. Weight 4.5 lbs. |
1056
|
HEAVY DUTY
DRIVING
AND FENDER
BENDING
TOOL
|
|
Useful for restoration of turned under, non-wired flanged edges. Also handy for alignment of inner construction and flanges on alligator hoods. Heavy formed striking pads. Length 14-1â„8″. Weight 3.2 lbs. |
1091
|
CAULKING
IRON
|
|
Excellent precision made wire caulking iron. Polished working surfaces are rounded for use on inside moldings. Face 1-3â„4″ × 1″. Overall length 11″. Weight 1.4 lbs. |
1096C
|
SURFACING
SPOON
|
|
Excellent spoon for fender spring hammering, finishing and shaping. Curve gets behind inner construction between panels that are close for removal of dents. Molds panels. Blade fully polished. 9†Blade Length. 2-1â„8″ Width. Overall Length 15-1â„8″. Weight 2.5 lbs. |
1024
|
MEDIUM
CROWN
SPOON
|
|
Long slender shape just like the 1024 surfacing spoon. Inside with medium crown, for high ridges or prying. For slapping and surface finishing on fenders, panels and trunk lids. Blade fully polished. 9″ Blade Length. 2-1â„8″ Width. Overall Length 14-7â„8″. Weight 2.5 lbs. |
1026
|
HEAVY DUTY
DOUBLE END
S-SPOON
|
|
General purpose fender and frame spoon. Designed to provide further reach on panels and behind reinforcements. Prying, heavy duty designed for use on SUV frames. 12-3â„16″ Length. 1-3â„8″ X 2-1â„4″ Face. Weight 2.1 lbs. |
1044
|
|
| |
BODY & FENDER REPAIR TOOLS: MISCELLANEOUS |
| Type |
|
Description |
Part No. |
ADJUSTABLE
AND
FLEXIBLE
FILE
HOLDERS |
 |
Permits use of files to 14″. Handle
adjustable for both right and left hand use
for working close to offset or panels. Permit
flexing either way to maximum point of
safety against breakage. Weight 1.7 lbs. |
1150 |
STANDARD
14″
BODY
FILE |
 |
Vixen milled, curved tooth. Plain blade.
Flexible, standard cut, 8 tooth. 14″ long.
Weight .66 lbs. |
1158F |
STRAIGHT
SHELL
BODY
FILE |
 |
Vixen milled, curved tooth. Plain blade. Half
round shell, 8 tooth. Concave for shallow
concave work.14″ long. Weight .66 lbs. |
1163F |
BODY
DENT
PULLER
TOOL |
 |
Slide hammer activated. This tool provides
a remarkably simple and easy method of
removing a dent in a door or panel. Merely
punch or drill a hole in the deepest part
of the damage and insert a self-threading
screw or hook. A few light impacts with
the slide hammer will return the metal to
original position. Shaft is 1⁄2″ × 13″ with
locking device to keep screw from turning.
Cadmium and black oxide rust-proof finish.
Weight 3.9 lbs. |
DP38 |
THE KEY
TO
METAL
BUMPING |
 |
This book, entitled “The Key to Metal
Bumping,” is an excellent instruction
manual and guide for every body man or
student. It provides authoritative reference
for techniques and methods for all phases
of body and fender work. Its 126 pages
cover most approaches to body repair
problems. Visual assistance is rendered
by more than 100 illustrations. It includes
explanations of many time-saving short-cut
methods to make the job easier and better.
Among other features is a glossary of terms
used in the trade. This is the third edition.
The first was published in the late 1930s
and has become a classic in its field. |
BFB |
|
| |
BODY & FENDER REPAIR TOOLS: TOOL SETS |
| Part No. |
659K |
WOOD HANDLES |
10 TOOLS |
153G - Cross chisel Straight Hammer, 158G - General Purpose Pick Hammer, 160G - Heavy Duty Bumping Hammer, 164G - Utility Pick Hammer, 1058 - Toe Dolly Block, 1059 - Heel Dolly Block, 1060 - General Purpose Dolly Block, 1036 - Light Dinging Spoon, 1150 - Adjustable File Holder, 1158F - Body File Standard 14″, BFB - Instruction Manual, BX18 - Tool Box |
 |
| Part No. |
691K |
WOOD HANDLES |
15 TOOLS |
153G - Cross Chisel Straight Hammer, 156G - Pick Hammer, 158G - General Purpose Pick Hammer, 160G - Heavy Duty Bumping Hammer, 161G - Dinging Hammer, 164G - Utility Pick Hammer, 1058 - Toe Dolly Block, 1059 - Heel Dolly Block, 1060 - General Purpose Dolly Block, 1036 - Light Dinging Spoon, 1052 - Spoon Dolly, 1050 - Combination Spoon, 1150 - Adjustable File Holder, 1158F - Body File Standard 14″, 162G - Shrinking Hammer, BFB - Instruction Manual, BX18 - Tool Box |
 |
| Part No. |
692K |
WOOD HANDLES |
25 TOOLS |
150G - Dinging Hammer, 153G - Cross Chisel Straight Hammer, 153GB - Cross Chisel Curved Hammer, 155G - Fender Bumper, 156G - Pick Hammer, 156GB - Curved Pick Hammer, 158G - General Purpose Pick Hammer, 160G - Heavy Duty Bumping Hammer, 161G - Dinging Hammer, 162G - Shrinking Hammer, 164G - Utility Pick Hammer, 168G - Cross Peen Finishing Hammer, 169G - Large Face Pick Finishing Hammer, 1036 - Light Dinging Spoon, 1050 - Combination Spoon, 1052 - Spoon Dolly, 1054 - Long Curved Spoon, 1058 - Toe Dolly Block, 1059 - Heel Dolly Block, 1060 - General Purpose Dolly Block, 1061 - Utility Dolly Block, 1068 - Low Crown Dolly Block, 1091 - Heavy Duty Driving Spoon, 1150 - Adjustable File Holder, 1158F - Body File Standard 14″, BFB - Instruction Manual, BX17 - Tool Box |
 |
| Part No. |
644K |
WOOD HANDLES |
4 TOOLS |
158G - General Purpose Pick Hammer, 153GB - Cross Chisel Curved Hammer, 1036 - Light Dinging Spoon, 1058 - Toe Dolly Block |
 |
| Part No. |
644KFG |
FIBERGLASS HANDLES |
158FG - General Purpose Pick Hammer, 153FGB - Cross Chisel Curved Hammer, 1036 - Light Dinging Spoon, 1058 - Toe Dolly Block |
| Part No. |
647K |
WOOD HANDLES |
7 TOOLS |
153GB - Cross Chisel Curved Hammer, 162G - Shrinking Hammer, 164G - Utility Pick Hammer, 1036 - Light Dinging Spoon, 1058 - Toe Dolly Block, 1059 - Heel Dolly Block, 1060 - General Purpose Dolly Block |
 |
| Part No. |
647KFG |
FIBERGLASS HANDLES |
153FGB - Cross Chisel Curved Hammer, 162FG - Shrinking Hammer, 164FG - Utility Pick Hammer, 1036 - Light Dinging Spoon, 1058 - Toe Dolly Block, 1059 - Heel Dolly Block, 1060 - General Purpose Dolly Block |
| Part No. |
694K |
WOOD HANDLES |
4 TOOLS |
158G - General Purpose Pick Hammer, 153GB - Cross Chisel Curved Hammer, 164G - Utility Pick Hammer, 170G - Door Skin Hammer |
 |
| Part No. |
694KFG |
FIBERGLASS HANDLES |
4 TOOLS |
158FG - General Purpose Pick Hammer, 153FGB - Cross Chisel Curved Hammer, 164FG - Utility Pick Hammer, 170FG - Door Skin Hammer |
 |
|
| |
|