Restores vehicles to OEM specifications to provide original quiet ride. Self-adhering, sound deadening panels designed to reduce noise levels in cars and trucks. Cuts easily with a razor blade, knife or scissors. Can be heated up to 300 degrees F to conform to any irregular surface. Permanent bonding once affixed. Acts as a waterproof barrier. #116 for doors, trunks and fenders, and #117 is extra strength for floorboards.

Two-part polyester finishing and blending putty. Includes ZNX-7™ for adhesion to galvanized metal, aluminum, steel, SMC, and O.E.M paint. Extra-thin formula spreads smoothly. Easily fills grind marks, pinholes, uneven surfaces and other MetalWorks® body fillers and glazing putties to enhance their ease of working. Sands easily. Pinhole-free. Helps prevent staining or bleed-through when used under basecoat/clearcoat paint systems. Blue cream hardener included.

Metal Glaze® OEM™ is a two-part, premium polyester finishing and glazing putty. It is engineered to restore the original factory resistant coatings that are removed during the metal straightening process. Its superior adhesion and corrosion resistance meets OEM specification of 500 hours salt spray (ASTM B117). Metal Glaze® OEM™ eliminates the costly step of coating the untreated metal before applying repair materials.

This high performance polyester finishing putty is a unique formula for final finishing over body filler, rust pits, pin holes, small holes, scratches, old painted surfaces, cured primed surfaces and topcoats. Poly-Glaze multi-surface finishing putty is ideal for metal and most flexible or rigid plastic parts. Poly-Glaze is flowable, spreads easily and is fast leveling. This tack free formula is ready to sand in 10 - 15 minutes. Mix Ratio: 50:1 Part KPG101 with KPG102 Blue Hardener. Poly-Glaze KPG101 is sold as a kit with enough KPG102 Hardener to activate the entire tube. Additional KPG102 Hardener is available and sold separately as necessary.

• Fills small imperfections on PUR, RIM, TPE, TPUR and metal.

• Fills small imperfections on PUR, RIM, TPE, TPUR and metal.

• Used for cosmetic or structural repair of SMC, FRP, HPA and PPO/PA.

GLAZE COAT was the first pourable finishing putty in the market. Like METAL GLAZE®, GLAZE COAT is vacuum processed for reduced pinholes and offers the same Features, Benefits and Performance as METAL GLAZE®, in a BUFF colored formula. Part of the Metal Works® System. White cream hardener included.

GLAZE-IT® is a two-part, flowable, polyester finishing putty ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections. Use as a finish coat over body filler repair areas to fill minor defects, deep sand scratches and pinholes prior to applying primer surfacer to improve the efficiency of the primer coat. Can also be used to fill minor body damage up to 1/8” in depth.

Two-component chemical liquid used for the final skimming of a polyester putty repair or for direct application onto minor imperfections on bodywork prior to over-painting.

• Self-leveling - will not pinhole.
• Ideal for skimming over finished body filler.
• Tackfree, bleedthrough resistant, shrink resistant.
• High adhesion to Galvanized, zinc coated steel, aluminum, cured paint and most plastics.
• Can be used on the following surfaces: Bare steel, Galvanized/zinc coated steels, aluminum and OEM surfaces.

A paste putty that levels like a pourable putty. Contains Hattonite™ for improved sandability. Cures quickly to a sandable state which makes it the ideal product for quick spot filling. Stain resistant for use under basecoat/clearcoat repairs. May be applied to galvanized metal, aluminum, bare steel, body filler, two-part primers and sanded OEM finishes. Part of the MetalWorks® System. Blue cream hardener included.

A paste putty that levels like a pourable putty. Contains Hattonite™ for improved sandability. Cures quickly to a sandable state which makes it the ideal product for quick spot filling. Stain resistant for use under basecoat/clearcoat repairs. May be applied to galvanized metal, aluminum, bare steel, body filler, two-part primers and sanded OEM finishes. Part of the MetalWorks® System. Blue cream hardener included.

A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flex™ may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included.

An extra strong polyester glazing putty. Ideally suited for repairs subject to stress and impact, such as door edges, fender edges, body seams and flexible bumpers. It’s a smooth formula with extra working time for use in warm weather and glazing large areas. Contains ZNX-7™ for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-coat and OEM finishes. Part of the MetalWorks® System. Blue cream hardener included.

Two-part flowable polyester finishing and blending putty. Contains Hattonite™ for optimum sanding performance. Ideally suited for filling and skim coating body work, pinholes, grind marks, low spots and other surface imperfections. Includes ZNX-7™ for adhesion to galvanized metal, aluminum and steel. Part of the MetalWorks® System. Blue cream hardener included.

Fast drying, red lacquer putty. Spreads smoothly and sands easily with minimal shrinkage.

Ultra smooth, incredibly easy to sand. Tack free, sand in 15-20 minutes. Helps prevent bleed through when used with USC's Premium body filler. Pinhole resistant, no shrinkage. Great feather-edging. Adheres to galvanized surfaces. With Raspberry Cream Hardener.

3M™ Piranha Advanced Finishing Putty is a two component, self-leveling putty designed for use as a skin coat over plastic filler to fill pinholes, sand scratches, low areas and other imperfections. 3M™ Polyester Finishing Putty is a stain-free and tack-free product that fills pinholes in body fillers and small imperfections in metal and fiberglass. Cures tack-free in 20 to 25 minutes. Vacuum processed to minimize pinholes.

3M™ Acryl-GREEN is a fast drying, easy sanding putty designed for spotty repairs. Spreads very easily and can be sanded in 10 to 15 minutes. 3M™ Acryl-BLUE is a slow drying, easy spreading putty recommended when more working time is desired. 3M™ Acryl-RED is a good general purpose putty and 3M™ Super-RED is an excellent glazing putty, with a long working time and minimal shrinkage.

The professional plastic spreader for:

• autobody fillers
• fiberglass
• resin
• putty

The professional plastic spreader for:

• autobody fillers
• fiberglass
• resin
• putty

available sizes: 3, 4, 5, or 6 inch

kit includes:

• 11 1/2" by 11 1/2" Body Filler Mixing Board
• Scraper
• 4" spreader
• 5" spreader
• 6" spreader

product features:

• Made from European clock spring steel
• Flexes to countour then springs back
• Has a non-nick edge for a smooth and exact spread

product features:

• Made of durable, heavy duty plastic.
• 12" x 12" mixing area.
• Cleans quickly and easily.

A novel tool for mixing body filler and other pastes.

BENEFITS:

• Clean mixing.
• No contamination.
• Throw-away sheets.
• Over 100 mixing sheets.

product features:

• These plastic spreaders, are a high-quality, reusable spreader.
• They are designed for mixing and applying resins, fillers, putties, compounds and gels.
• Made of non-absorbent polyethylene so materials won’t stick. Once material is dry, just twist the spreader and the material with pop off.
• 72 pcs. in a display box.

Stanley Surform file blade 21-299 is a half round convex blade for faster stock removal and shaping curved surfaces. Ideal for work on fiberglass and removing filler. 10" length.