*Block® Firm & Flex Blocks were designed to give collision repair professionals and restoration enthusiasts a sanding block tool that easily allows you to find and restore low and high spots. The blocks are ergonomically designed to be comfortable to use even during long periods of blocking. *Blocks® are a great choice for working on street rods and old muscle cars as they allow you to get the job done right and done quickly.

NEW! *Block Wet/Dry Sanding Blocks:

*Block Wet/Dry Sanding Blocks are the Ultimate tool for Block Sanding and Wet Sanding.

*Blocks are two tools in one, use the firm flat bottom for super cutting on flat surfaces, flip it over and use the soft yellow flexible foam to conform to uneven surfaces, yet firm enough to perform flat and even cutting.

*Blocks are constructed of closed cell foam that will float in your color sanding bucket and not collect sanding grit and debris.

*Blocks® are sold either individually or in a basic kit with 9", 16" and 24" blocks.

These are the sanders demonstrated in Jon Kosmoski's book Advanced
Custom Painting Techniques. Now you can buy them here.

This set includes:

• 27" flexible long board sander
• 21" flexible long board sander
• 15" flexible long board sander
• 9" flexible long board sander
• 6" flexible sander
• 4.5" flexible sander

This set includes:

• 21" flexible long board sander
• 15" flexible long board sander
• 9" flexible long board sander
• 6" flexible sander
• 4.5" flexible sander

When your shaping really matters, this sander is going to be the judge. The 36" sander is made out of a 10lb. density foam, has a .063" 7075-T6 Aluminum base. Nylon 6 rod chases within. It also comes with 3 - 1/4" and 3 - 3/16" fully hardened rods and some extra end caps.

The NEW 27" Sander has Denser Foam and a Thicker Base Plate! The handle is made from a red 10lb. density foam verses the green 8lb. It features a .020" base plate and for stiffening elements it uses two 3/16" rods on each side and one 1/4" rod in the middle. Over a year spent developing this tool and it's just what you'd expect for the money. In fact, it'll probably pay for itself in material and time on the first panel. Each sander comes with a set of vinyl end caps to prevent the rods from sliding around and to prevent unwanted scratches when working in tight areas.

The most popular AFS sander size. A great choice when working on street rods, muscle cars, or anywhere a show finish is needed. You wouldn't believe how much easier and quicker it is to straighten a panel with just six more inches of sander. Made out of 8 lb. density foam, it has a .015" thick base plate. Comes with 3 - 5/32" rods and ends caps.

If you are in the collision repair industry this will probably be your sander of choice, in fact it may be more sander then you need. It'll easily allow you to find the lows and restore the panel to better then factory condition. This is also a wonderful tool to have in your arsenal when you get into tight spots with the 21 and need a little more swinging room. Made out of 8 lb. density foam, has a .015" thick base plate. Comes with 3 - 5/32" rods and ends caps.

This sander is only nine inches long, but will easily outperform board files twice its length. An ideal choice for sanding cowls, motorcycle tanks and fenders. Made out of a 8 lb. density foam, has a .010" thick base plate and comes with 3 - 1/8" rods and end caps.

The 6" sander is generally used for scuffing surfaces that are unsafe for barehanded sanding, such as areas with exposed spot welds or sharp edges. It's very comfortable to use and will last for years instead of months.

The 4.5" sander is an excellent choice for sanding around fender openings, small parts like motorcycle side covers, tanks, automotive bezels, mirrors and garnish molding or objects with small lows or sharp curves. Made out of 8 lb. density foam, it has a .008" thick base plate. Comes with 3 - 1/8" rods and end caps.

Contact Us: (858) 909-2120

3M™ Stikit™ Gold Paper only. Used on file shoes, sanding blocks, or file boards. Pressure sensitive adhesive sheets on a roll. Helps to save paper because you do not have to fold the abrasive. Use 100% of the material.