ArtoGraph Professional Air-Brush Spray Booths
1520 Standard Compact Air-Brush Spray Booth
An efficient booth for small spaces and tight budgets, the 1520 accommodates flat or 3-D objects. The 15" x 20" (38 x 51 cm) work surface features a three-stage filter system: a replaceable pre-filter sheet, which captures the bulk of the sprayed materials, thick polyester mid-filter and polyester/carbon filter. Features a built-in exhaust adapter for venting out-of-doors or to another space.
ART 225-315 - 1520 Standard Compact Air-Brush Spray Booth
ART 225-316 - Pre-Filter, 20 Sheet Pack
ART 225-317 - Filter Pack (4 each mid-filter and poly-carb pads)
ART 225-355 - Pre-Filter Roll Tray
ART 225-356 - Pre-Filter Roll (20" by 50 yards)
Product Highlights
- Features a 15" x 20" (38 x 51 cm) work surface accommodates flat or 3-D objects up to 13" x 18".
- Replaceable three-stage filter design
- Replaceable spray guard hood
- Combines low cost with high efficiency
- Airflow: 185 CFM
- Weight: 17 lbs.
- Width: 20"
- Depth: 15"
- Height: 18"
- Electrical: 115 V, 15-watts
- 5-year warranty
- Made in the U.S.A.
Features Three-Stage Filter Design:
1st Stage: 100% polyester pre-filter media that traps the bulk of the initial spray and provides a continuous clean work surface. Spray Systems includes 5 pre-cut sheets. Replacement Pre-Filters available in a pre-cut 20 sheet pack or unique cost-saving 50-yard roll.
2nd Stage: Under the pre-filter is a 1" thick non-woven polyester air-laid material with a blue PVC binder on the exit side. This material, unlike fiberglass, is non-toxic, will not migrate on the air exit side and offers excellent filtration. Spray System includes 1 each of this filter.
3rd Stage: A carbon-impregnated polyester (poly-carb) offering odor and further particle-trapping efficiency. Spray System includes 1 each of this filter.
Standard Booth Accessories and 1520 Replacement Filters
Pre-Filter - thin replaceable 100% polyester pre-filter traps the bulk of the initial spray and provides a continuously clean work surface. Comes in conveniently pre-cut sheets. Should be replaced approximately every 90 surface sprays.
ART 225-316 - Pre-Filter, 20 Sheet Pack
Filter Pack - 4 each mid-filter & poly-carb filter pads. The mid-filter is a non-woven air-laid polyester substrate with a green PVC binder on the exit side. Poly-carb filter is a carbon-impregnated polyester offering high odor and further particle-trapping efficiency. Note: Both filters should be replaced at the same time, approximately every three months with regular use or when replacing the Pre-Filter Roll.
ART 225-317 - Filter Pack (4 each mid-filter and poly-carb pads)
Pre-Filter Roll Tray - mounted to the back of the unit to conveniently hold the Pre-Filter Roll (#225-356). Pre-Filter not included.
ART 225-355 - Pre-Filter Roll Tray
Pre-Filter Roll - unique roll mounted 100% polyester pre-filter that traps the bulk of the initial spray and provides a continuous clean work surface. To replace, simply pull down the soiled pre-filter and cut it off with a pair of scissors. 20" x 50 yards, 100% spun bonded continuous filament polyester. Provides approximately 90 surface sprays.
ART 225-356 - Pre-Filter Roll (20" by 50 yards)
1530 Hobby Model Air-Brush Spray Booth
Unique spray system ideal for the model builder or designer. The 15" x 30" (38 x 76 cm) spray booth (accommodates objects up to 28" long and 13" wide) is ideal for reducing the over spray and odors from aerosol or airbrush painting. The 1530 offers a three-stage filter system: a replaceable pre-filter sheet, which captures the bulk of the sprayed materials, thick polyester mid-filter and a polyester/carbon filter. The built in exhaust adapter can be outfitted for venting out-of-doors. The 1530 features a metal hood with a clear window for excellent illumination and a perforated front edge for hanging small parts.
ART 225-345 - 1530 Hobby Model Air-Brush Spray Booth
ART 225-346 - Pre-Filter, 20 Sheet Pack
ART 225-347 - Filter Pack (4 each mid-filter and poly-carb pads)
ART 225-348 - Pre-Filter Roll Tray
ART 225-349 - Pre-Filter Roll (40" by 50 yards)
Product Highlights
- 15" x 30" (38 x 76 cm) work surface
- Conveniently angled
- Metal spray guard hood with clear acrylic window allows for more ambient light
- Built in exhaust port for external venting
- High-efficiency, replaceable Three-stage filter design
- Airflow: 370 CFM (Free or Unrestricted Air)
- Width: 30"
- Depth: 15 ½ "
- Height: 21"
- Weight: 22 lbs.
- Electrical: 115V, 15-watts
- 5-year warranty
- Made in the U.S.A.
Features Three-Stage Filter Design:
1st Stage: 100% polyester pre-filter media that traps the bulk of the initial spray and provides a continuous clean work surface. Spray Systems includes 5 pre-cut sheets. Replacement Pre-Filters available in a pre-cut 20 sheet pack or unique cost-saving 50-yard roll.
2nd Stage: Under the pre-filter is a 1" thick non-woven polyester air-laid material with a blue PVC tackifier binder on the exit side. This material, unlike fiberglass, is non-toxic, will not migrate on the air exit side and offers excellent filtration for particles 5 microns or larger. Spray System includes 1 each of this non-woven polyester material.
3rd Stage: A carbon-impregnated polyester (poly-carb) offering high odor and further particle-trapping efficiency. Spray System includes 1 each of this filter.
Hobby Booth Accessories and 1530 Booth Filters
Pre-Filter - thin replaceable 100% polyester pre-filter traps the bulk of the initial spray and provides a continuously clean work surface. Comes in conveniently pre-cut sheets. Should be replaced approximately every 90 surface sprays.
ART 225-346 - Pre-Filter (20 sheet pack)
Filter Pack - 4 each mid-filter & poly-carb filter pads. The mid-filter is a non-woven air-laid polyester substrate with a green PVC binder on the exit side. Poly-carb filter is a carbon-impregnated polyester offering high odor and further particle-trapping efficiency. Note: Both filters should be replaced at the same time, approximately every three months with regular use or when replacing the Pre-Filter Roll.
ART 225-347 - Filter Pack (4 each mid-filter and poly-carb pads)
Pre-Filter Roll Tray - mounted to the back of the unit to conveniently hold the Pre-Filter Roll (#225-349). Pre-Filter not included.
ART 225-348 - Pre-Filter Roll Tray
Pre-Filter Roll - unique roll mounted 100% polyester pre-filter that traps the bulk of the initial spray and provides a continuous clean work surface. To replace, simply pull down the soiled pre-filter through the attached cutting bar, and tear off like a paper towel dispenser. 30" x 50 yards, 100% spun bonded continuous filament polyester. Provides approximately 90 surface sprays.
ART 225-349 - Pre-Filter Roll (30" by 50 yards)
2025 Graphic Artist Air-Brush Spray Booth
A must have for all commercial art studios, offices or classrooms that use spray adhesives, fixatives or other sprayed materials. The feature rich 2025 is designed for the work area where sprayed materials are used frequently.
ART 225-325 - 2025 Graphic Artist Air-Brush Spray Booth
ART 225-326 - Pre-Filter Roll (25" by 50 yards)
ART 225-327 - Filter Pack (4 each mid-filter and poly-carb pads)
ART 225-328 - Activated Carbon Filter
ART 225-330 - High Efficiency Activated Carbon Filter
Product Highlights
- Features large 20" x 25 " (51 x 64 cm) work area to accommodate flat or 3-D objects up to 18" x 23", while fitting comfortable on a counter top.
- Powerful 2-speed fan and 4-stage dual carbon filter system ensure a cleaner and safer work environment.
- An external exhaust adapter (item #225-329) is available for venting out-of-doors.
- Filter housing adjusts from 0° to 45° for the most suitable angle for even spraying.
- Replaceable filters and spray guard hood
- Highly efficient
- Variable airflow: High Speed - 365 CFM; Low Speed - 200 CFM
- Width: 25"
- Depth: 22"
- Height: 25"
- Weight: 45 lbs.
- 5-year warranty
- Electrical: 115V, 85-watts
Features Four-Stage Filter Design:
1st Stage: 100% polyester pre-filter media that traps the bulk of the initial spray and provides a continuous clean work surface. Spray Systems includes 5 pre-cut sheets. Replacement Pre-Filters available in a unique cost-saving 50-yard roll.
2nd Stage: Under the pre-filter is a 1" thick non-woven polyester air-laid material with a blue PVC binder on the exit side. This material, unlike fiberglass, is non-toxic, will not migrate on the air exit side and offers excellent filtration. Spray System includes 1 each of this filter.
3rd Stage: A carbon-impregnated polyester (poly-carb) offering high odor and further particle-trapping efficiency. Spray System includes 1 each of this filter.
4th Stage: This filter consists of a high-density activated carbon material, suspended under a pleated, high-efficiency cotton filter media. Together, they provide further odor and fume-removing properties as well as particle-filtering characteristics. Filter contained in a metal frame. Spray System includes 1 each of this filter.
Graphic Artist Booth Accessories and 2025 Booth Filters
Pre-Filter Roll - unique roll mounted 100% polyester pre-filter that traps the bulk of the initial spray and provides a continuous clean work surface. To replace, simply pull down the soiled pre-filter through the attached cutting bar, and tear off like a paper towel dispenser. 25" x 50 yards, 100% spun bonded continuous filament polyester. Provides approximately 90 surface sprays.
ART 225-326 - Pre-Filter Roll (25" by 50 yards)
Filter Pack - 4 each mid-filter & poly-carb filter pads. The mid-filter is a non-woven air-laid polyester substrate with a blue PVC binder on the exit side. Poly-carb filter is a carbon-impregnated polyester offering high odor and further particle-trapping efficiency. Note: Both filters should be replaced at the same time, approximately every three months with regular use or when replacing the Pre-Filter Roll.
ART 225-327 - Filter Pack (4 each mid-filter and poly-carb pads)
Activated Carbon Filter - High-density activated carbon material, suspended under a pleated, high-efficiency cotton filter media. (50% fill) Should be replace approximately every six months to a year depending on usage.
ART 225-328 - Activated Carbon Filter
High Efficiency Activated Carbon Filter - High-density activated carbon material, suspended under a pleated, high-efficiency cotton filter media (100% fill). Offers twice the efficiency and more odor removal than the standard activated carbon filter (#225-328). Should be replaced approximately every six months to a year depending on usage.
ART 225-330 - High Efficiency Activated Carbon Filter
Make it easy. Make it clean...with Artograph Spray Booths.
Reduce the hazards and mess associated with the use of aerosol sprays, spray guns, and airbrushes with a spray booth from Artograph. Suited for the professional to the hobbyist, our exclusive filtering systems and high volume fans keep your work environment neat and clean by effectively collecting the over spray and reducing the fumes from airbrush materials, fixatives, adhesives, or finishes that soil the work area and contaminate the air.