| Cart Total |
|
|
| Subtotal: |
$0.00 |
| Tax: |
$0.00 |
| Total: |
$0.00 |
|
View Cart |
|
|
|
|
|
Etching / Abrasive
Etching with the airbrush requires precision control for fine details and the power to deliver the abrasive to the surface. Our staff airbrushing experts have selected the airbrushes meeting those requirements and we offer them here for your shopping convenience
Airbrush Model G78
Single-Action Gravity Feed Air Abrasive Etching Airbrush Gun
Operates like a Mini Sand-Blaster!
This Professional Etching Airbrush Gun has a Large 1/2 oz. Cup and a 0.5 mm Needle/Nozzle, Full 1-Year Warranty on Airbrush
Also includes: 6" Braided Hose with Mini-Inline Moisture Filter, Jar of Aluminum Oxide Abrasive
5 oz. (150g) net weight, Dust Mask and Hanger
Common Applications: The Air Abrasive & Etching Airbrush Gun is a versatile instrument that can erase color errors and act as an etching tool.
It is used by hobbyists and manufacturers to clean jewelry and fine parts, remove discoloration, rust, corrosion, etch glass, or cut monograms. It is issued by lithographers to highlight half tones and erase defects without marring the surface or leaving a smudge. It is used extensively by model railroaders for weathering railcars & accessories.
View Detailed Features & Applications
Operation:
For general erasing, clean dry air at pressures of 30 to 45 PSI may be used. To be sure of satisfactory performance a Moisture Trap or Regulator with Moisture Trap should be used to remove, within their rated capacity, water oil and other impurities from your source of air supply. Air compressors with a air supply tank are recommended. Expect a slight trickle of abrasive to flow out after the button has released. This is caused by air pressure in the cup being relieved.
- Attach air hose coupling to Valve Casing
- Unscrew Cover
- Fill cup 3/4 full with clean dry sand, tighten cover securely.
- To prevent leaks, do not get any abrasive on the cup threads
- Regulate air pressure for erasing on paper surfaces to approximately 30 PSI. Use a higher air pressure of 45 to 65 PSI for metal, gold castings, plastic or glass work.
- Hold the Model G78 the way you would a pencil. Move the Model G78 with the Tip about 1/8” to 1/2” above the work surface. Adjust to achieve results desired.
- Adjust Control Screw to the lowest point to avoid excessive use of abrasive.
- For work requiring fast, heavy abrasive cutting, use Fast Cutting Abrasive and high air pressure. Hold tip of the Model G78 very close to the working surface to cut faster. Hold at a distance for blending and broad coverage.
WARNING: Maximum Air Pressure 65 PSI
Click Here to View All G78 Airbrush Kits
sku: MAS G78, Master Airbrush Model G78, price: $39.98
AEC-K Air Eraser Kit
PAS AEC-K, PAS AEC
Air Eraser Kit can be used anywhere an abrasive is required to delicately erase; such as decorative etching on glass. Can also be used by the professional technician, manufacturer, hobbyist or for dental lab work, erasing color, removing rust or smooth castings.
AEC-K Kit Includes:
One AEC Air Eraser with Hardened Stainless Steel Tip, one jar of AEX-6 Fast Cutting Compound, one-4' Air Hose with Moisture Trap, Wrench, Hanger, 5 Disposable Respirators and Parts Sheet.
PAS AEC-K - AEC-K Air Eraser Kit, only $79.38
PAS AEC - AEC Air Eraser Only, only $56.07
AECR REMOTE FEED
AIR ERASER
(Maximum Cup Pressure 50 P.S.I.)
The AECR reproduces all the fine accomplishments of the AEC Air Eraser and with its Quart Cup offers greater flexibility through use of a quart container. This in turn, offers greater freedom of movement for the operator. The Optional R-75AR Regulator with gauge and moisture drain gives user closer control of operating pressures as well as assisting in furnishing clean dry regulated air. Always wear protective equipment, Glasses and Respirator, when using Remote Feed Air Eraser.
AECR COMPONENTS: AECR Remote Feed Air Eraser, 20SCC Quart Cup 32 oz. (0.946 l.), AE-51 Cover Assembly, AE-52 Plastic Hose Assembly, AE-59 Gasket, A- 1/8"-6-MT Air Hose W/MT Trap, 7-GN Gasket and Parts List.
OPTIONAL ACCESSORIES: R-75AR Regulator & Filter w/Gauge, PBO-12 Safety Relief Valve, HF-592 Adapter, HF-33 Adapter (2)
PAS AECR - Remote Air Erasor, only $91.74
PAS AEC-34 - Tip with Insert, only $8.80
PAS AEC-34R - Tip with Insert, only $11.95
AIR ERASER COMPOUND
Recommended Cutting Compounds for Air Erasor and Abrasive Gun
Fast Cutting Compound - Aluminum Oxide:
PAS AEX-6 - Fast Cutting Compound, 6 oz. (170g), only $5.25
PAS AEX-5 - Fast Cutting Compound, 5 pounds (2.3kg), only $22.00
PAS AEX-25 - Fast Cutting Compound, 25 pounds (11.3kg), only $78.00
Medium Cutting Compound - Pumice:
PAS AE-6OZ - Medium Cutting Compound, 6 oz. (170g), only $6.15
PAS AE-5 - Medium Cutting Compound, 5 pounds (2.3kg), only Unknown
Slow Cutting Compound - Starch:
PAS SSO-6 - Slow Cutting Compound, 6 oz. (170g), only $6.25
LAC#3 ABRASIVE GUN
PAS LAC#3, PAS LAC-3
The LAC#3 is used the same as the AEC Air Eraser but for larger jobs requiring fast cutting speed. Both have an adjustable feature which enables the user to control the amount of abrasive used. A 1/4" air connector is required. The LAC#3 has a carbide tip for longer life.
Recommended Air Pressure: Cutting pressures range from 20-80 lbs. depending on abrasive or cutting speed desired.
LAC#3 COMPONENTS:
Quart Container 32 oz. (0.946 l.), Parts List
PAS LAC#3 - LAC#3 Abrasive Gun, only Unknown
PAS LAC-3 - Carbide Insert Air Cap, only $13.95
Six Station Airbrush Holder
NEW! A must-have for every airbrush artist!
beginner or professional.
TH-40 Airbrush Holder holds up to 8 airbrushes and sits on table or bench top, allowing access from all sides. With 6 individual branch valves, you can have 6 airbrushes connected to air all the time. It also features a 360° rotary pressure gauge. The top holder swivels to help keep airbrushes balanced.
sku: ABD TH-40, only $49.95
|