AE - Acrylic Enamel

The Restoration Shop AE Acrylic Enamel with Polyurethane Hardener system is a single stage system designed for overall automobile refinishing or as a fleet and equipment finish. It resists the elements, retaining color and gloss in an easy-to-use system.

144 Factory Packed Colors Available

Click Here for color charts and purchasing information for Acrylic Enamel Paint and Kits.

Colors from the 1900s through today's current colors are available at the
Auto Color Library.

Click Here to browse from our library of more than 25,000 color chips and over 200,000 available custom mixed colors.

Acrylic Enamel Associated Products

Wet Look Acrylic Enamel Hardener

Mix at 8:1 ratio with any Acrylic Enamel color to add a polyurethane enhancement that achieves a deep glossy wet-look shine that will last for years. Available as part of a kit or separately here.

UR- Urethane Reducer

AE Acrylic Enamel with AE3001 Hardener creates a polyurethane enhanced product that sprays great with our specially blended urethane reducer. UR creates better flow and metallic control than ordinary enamel reducer.

RSP UR70-QT - Quart of Medium Urethane Reducer
RSP UR70-GL - Gallon of Medium Urethane Reducer
RSP UR85-QT - Quart of Slow Urethane Reducer
RSP UR85-GL - Gallon of Slow Urethane Reducer
RSP UR60-QT - Quart of Fast Urethane Reducer
RSP UR60-GL - Gallon of Fast Urethane Reducer

RSP XR70-QT - Quart of Xempt Low VOC Reducer
RSP XR70-GL - Gallon of Xempt Low VOC Reducer

PS - Acrylic Enamel Primer Sealer

Restoration Shop PS Acrylic Enamel Primer Sealer is a fast drying, non-sanding Enamel Primer with excellent adhesion and moisture resistance for very good corrosion resistance. It is recommended for additional corrosion resistance and to act as a great ground coat for all AE colors. It assists in giving a great uniform base with great color holdout and is available in six color kits: white, gray, red, yellow, blue and black. PS Acrylic Enamel Primer Sealer comes ready-to-spray and is available in gallon cans or in kit form with an additional half pint of hardener for added toughness and adhesion.

RSP PS441-KIT - PS Acrylic Enamel Primer Sealer Kit, white
RSP PS442-KIT - PS Acrylic Enamel Primer Sealer Kit, gray
RSP PS443-KIT - PS Acrylic Enamel Primer Sealer Kit, red
RSP PS444-KIT - PS Acrylic Enamel Primer Sealer Kit, yellow
RSP PS445-KIT - PS Acrylic Enamel Primer Sealer Kit, blue
RSP PS446-KIT - PS Acrylic Enamel Primer Sealer Kit, black

RSP PS441-GL - PS Acrylic Enamel Primer Sealer Gallon Only, white
RSP PS442-GL - PS Acrylic Enamel Primer Sealer Gallon Only, gray
RSP PS443-GL - PS Acrylic Enamel Primer Sealer Gallon Only, red
RSP PS444-GL - PS Acrylic Enamel Primer Sealer Gallon Only, yellow
RSP PS445-GL - PS Acrylic Enamel Primer Sealer Gallon Only, blue
RSP PS446-GL - PS Acrylic Enamel Primer Sealer Gallon Only, black

KPP POLYESTER PRIMER SURFACER is a corrosion-resistant, sanding primer surfacer based on an air-drying polyester resin. The pigmentation is carefully balanced for optimum sanding properties. It is fast drying and has excellent filling properties and adhesion over fiberglass, metal, plastic and wood. Can be topcoated with all types of finishes, acrylics, lacquers, synthetic enamels and two-component urethane coatings.

All KPP Polyester Primers are sold as a kit that includes enough hardener for the container size that is purchased. Extra hardener is available and sold separately if needed.

KUS KPP105-GL - Polyester Primer Surfacer (Gray)
KUS KPP105-QT - Polyester Primer Surfacer (Gray)
KUS KPP106-GL - Polyester Primer Surfacer (Black)
KUS KPP106-QT - Polyester Primer Surfacer (Black)
KUS KPP107-GL - Polyester Primer Surfacer (Buff)
KUS KPP107-QT - Polyester Primer Surfacer (Buff)
KUS KPP108-GL - Polyester Primer Surfacer (White)
KUS KPP108-QT - Polyester Primer Surfacer (White)
KUS KPP109-GL - Polyester Primer Surfacer (Red Oxide)
KUS KPP109-QT - Polyester Primer Surfacer (Red Oxide)

Old-School Lacquer Speed Prime

Quick-Dry Primer Surfacer is a single-component, low VOC lacquer primer. This premium primer offers maximum high build and adhesion properties. Old-School Lacquer Speed Prime is also corrosion-resistant, and may be wet or dry sanded. Recommended under acrylic enamels, synthetic enamels, acrylic lacquers.

KUS KIT-KL611-GL - Old-School Lacquer Speed Prime Kit
KUS KL611-GL - Old-School Lacquer Speed Prime, Gallon
KUS KL611-QT - Old-School Lacquer Speed Prime, Quart

KEP - DTM Epoxy Prime/Seal

An excellent corrosion resistant primer that offers optimum adhesion and superior hide to many types of properly prepared metal, aluminum, fiberglass and plastic filling materials. DTM Epoxy Prime / Seal, is easy to sand and topcoat with all current base coats. It can be used as a sealer and applied wet-on-wet when reduced with KR Reducers. DTM Epoxy Prime / Seal is chromate free.

Mix Ratio: 2 parts KEP Primer to 1 part KEP 502 Hardener.

KUS KIT-KEP505-GL - DTM Gray Epoxy Primer Gallon Kit
KUS KIT-KEP505-QT - DTM Gray Epoxy Primer Quart Kit
KUS KIT-KEP506-GL - DTM Black Epoxy Primer Gallon Kit
KUS KIT-KEP506-QT - DTM Black Epoxy Primer Quart Kit
KUS KIT-KEP507-GL - DTM White Epoxy Primer Gallon Kit
KUS KIT-KEP507-QT - DTM White Epoxy Primer Quart Kit
KUS KIT-KEP508-GL - DTM Red Oxide Epoxy Primer Gallon Kit
KUS KIT-KEP508-QT - DTM Red Oxide Epoxy Primer Quart Kit

KUS KEP505-GL - DTM Epoxy Prime / Seal (Gray), Part A
KUS KEP505-QT - DTM Epoxy Prime / Seal (Gray), Part A
KUS KEP506-GL - DTM Epoxy Prime / Seal (Black), Part A
KUS KEP506-QT - DTM Epoxy Prime / Seal (Black), Part A
KUS KEP507-GL - DTM Epoxy Prime / Seal (White), Part A
KUS KEP507-QT - DTM Epoxy Prime / Seal (White), Part A
KUS KEP508-GL - DTM Epoxy Prime / Seal (Red Oxide), Part A
KUS KEP508-QT - DTM Epoxy Prime / Seal (Red Oxide), Part A

KEP - DTM Epoxy Prime / Seal Hardener
KUS KEP502-QT - DTM Epoxy Hardener, Part B
KUS KEP502-PT - DTM Epoxy Hardener, Part B

Restoration Shop Products, especially those which contain isocyanates are for professional use only and are not intended for sale to the general public.
It is important that you read and understand the specific MSDS prior to
purchasing or using any of our products.

KFP - 2K HIGH BUILD ISO-FREE PRIMER

KFP is a high quality, direct to metal chromate and isocyanate free high build primer surfacer that is formulated to provide excellent corrosion resistance and adhesion. When applied over properly prepared steel, galvanized, aluminum and fiberglass, 2K ISO-FREE PRIMER is easy to sand and topcoat with all current base coats. It can be used as a sealer and applied wet-on-wet when reduced with KR Reducer.

Mix ratio: 3 parts KFP Primer to 1 part KFP 306 Hardener as a high build surfacer.
As a sealer mix 3 parts KFP Primer to 1 part KFP 306 Hardener and 1 part KR Reducer.

2K High Build ISO-Free Primer Complete Kits
KUS KIT-KFP305-GL - 2K High Build ISO-Free Primer Gallon Kit
KUS KIT-KFP305-QT - 2K High Build ISO-Free Primer Quart Kit

2K High Build ISO-Free Primer Only
KUS KFP305-GL - 2K High Build ISO-Free Primer, Part A
KUS KFP305-QT - 2K High Build ISO-Free Primer, Part A

2K High Build ISO-Free Hardener Only
KUS KFP306-QT - 2K High Build ISO-Free Hardener, Part B
KUS KFP306-HP - 2K High Build ISO-Free Hardener, Part B

KW - Grease and Wax Remover

KW901 is designed to dissolve and remove surface contaminants commonly found on painted surface such as grease, wax, tar, adhesive residue, tree sap. Insect residue. KW901 is a fast acting product to dissolve and loosen contaminants and enable them to be wiped and removed from the surface to be painted. Use before any bodywork or painting operation to assure a clean quality surface. Use with clean lint free wiping cloths, use a separate wet cloth and a separate removal cloth. Change both cloths often during this cleaning procedure.

KUS KW901-GL - Grease and Wax Remover, Gallon
KUS KW901-QT - Grease and Wax Remover, Quart

KE - Fisheye Eliminator

KUS KE215-HP - Fisheye Eliminator, Half Pint

Kustom Poly-Glaze

This high performance polyester finishing putty is a unique formula for final finishing over body filler, rust pits, pin holes, small holes, scratches, old painted surfaces, cured primed surfaces and topcoats. Poly-Glaze multi-surface finishing putty is ideal for metal and most flexible or rigid plastic parts. Poly-Glaze is flowable, spreads easily and is fast leveling. This tack free formula is ready to sand in 10 - 15 minutes. Mix Ratio: 50:1 Part KPG101 with KPG102 Blue Hardener. Poly-Glaze KPG101 is sold as a kit with enough KPG102 Hardener to activate the entire tube. Additional KPG102 Hardener is available and sold separately as necessary.

KUS KPG101 - Poly-Glaze Kit (24 Oz Tube of Poly-Glaze plus separate tube of hardener)
Additional Hardener:
KUS KPG102 - Poly-Glaze Hardener, Tube

Check our line of Tack Cloths for dust-free finishing

Check our line of 3M Products for all your sanding needs

We would like to remind you of the importance of a good respirator while spraying paint or while
performing operations such as mixing, sanding or grinding. We make it easy to do the right thing.
Buy it NOW!