Acrylic Lacquer Associated Products
Thinner
 RSP LT70-GL - Gallon of Medium Thinner
RSP LT70-QT - Quart of Medium Thinner
RSP LT85-GL - Gallon of High Gloss Slow Thinner
RSP LT85-QT - Quart of High Gloss Slow Thinner
Acrylic Lacquer Sunscreen Clear
RSP CL3245-GL - Gallon of Acrylic Lacquer Sunscreen Clear
RSP CL3245-QT - Quart of Acrylic Lacquer Sunscreen Clear
 Old-School Lacquer Speed Prime
Quick-Dry Primer Surfacer is a single-component, low VOC lacquer primer. This premium primer offers maximum high build and adhesion properties. Old-School Lacquer Speed Prime is also corrosion-resistant, and may be wet or dry sanded. Recommended under acrylic enamels, synthetic enamels, acrylic lacquers.
KUS KIT-KL611-GL - Old-School Lacquer Speed Prime Kit
KUS KL611-GL -
Old-School Lacquer Speed Prime, Gallon
KUS KL611-QT -
Old-School Lacquer Speed Prime, Quart
 KPP POLYESTER PRIMER SURFACER is a corrosion-resistant, sanding primer surfacer based on an air-drying polyester resin. The pigmentation is carefully balanced for optimum sanding properties. It is fast drying and has excellent filling properties and adhesion over fiberglass, metal, plastic and wood. Can be topcoated with all types of finishes, acrylics, lacquers, synthetic enamels and two-component urethane coatings.
All KPP Polyester Primers are sold as a kit that includes enough hardener for the container size that is purchased. Extra hardener is available and sold separately if needed.
KUS KPP105-GL - Polyester Primer Surfacer (Gray)
KUS
KPP105-QT - Polyester Primer Surfacer (Gray)
KUS KPP106-GL - Polyester Primer Surfacer (Black)
KUS KPP106-QT - Polyester Primer Surfacer (Black)
KUS KPP107-GL - Polyester Primer Surfacer (Buff)
KUS KPP107-QT - Polyester Primer Surfacer (Buff)
KUS KPP108-GL - Polyester Primer Surfacer (White)
KUS KPP108-QT - Polyester Primer Surfacer (White)
KUS KPP109-GL - Polyester Primer Surfacer (Red Oxide)
KUS KPP109-QT - Polyester Primer Surfacer (Red Oxide)
 KEP - DTM Epoxy Prime/Seal
An excellent corrosion resistant primer that offers optimum adhesion and superior hide to many types of properly prepared metal, aluminum, fiberglass and plastic filling materials. DTM Epoxy Prime / Seal, is easy to sand and topcoat with all current base coats. It can be used as a sealer and applied wet-on-wet when reduced with KR Reducers. DTM Epoxy Prime / Seal is chromate free.
Mix Ratio: 2 parts KEP Primer to 1 part KEP 502 Hardener.
KUS KIT-KEP505-GL - DTM Gray Epoxy Primer Gallon Kit
KUS KIT-KEP505-QT - DTM Gray Epoxy Primer Quart Kit
KUS KIT-KEP506-GL - DTM Black Epoxy Primer Gallon Kit
KUS KIT-KEP506-QT - DTM Black Epoxy Primer Quart Kit
KUS KIT-KEP507-GL - DTM White Epoxy Primer Gallon Kit
KUS KIT-KEP507-QT - DTM White Epoxy Primer Quart Kit
KUS KIT-KEP508-GL - DTM Red Oxide Epoxy Primer Gallon Kit
KUS KIT-KEP508-QT - DTM Red Oxide Epoxy Primer Quart Kit
KUS KEP505-GL - DTM Epoxy Prime / Seal (Gray), Part A
KUS KEP505-QT -
DTM Epoxy Prime / Seal (Gray), Part A
KUS KEP506-GL -
DTM Epoxy Prime / Seal (Black), Part A
KUS KEP506-QT -
DTM Epoxy Prime / Seal (Black), Part A
KUS KEP507-GL -
DTM Epoxy Prime / Seal (White), Part A
KUS KEP507-QT -
DTM Epoxy Prime / Seal (White), Part A
KUS KEP508-GL -
DTM Epoxy Prime / Seal (Red Oxide), Part A
KUS KEP508-QT -
DTM Epoxy Prime / Seal (Red Oxide), Part A
KEP - DTM Epoxy Prime / Seal Hardener
KUS KEP502-QT - DTM Epoxy Hardener, Part B
KUS KEP502-PT - DTM Epoxy Hardener, Part B
Restoration Shop Products, especially those which contain isocyanates are for professional use only and are not intended for sale to the general public.
It is important that you read and understand the specific MSDS prior to
purchasing or using any of our products.
 KFP - 2K HIGH BUILD ISO-FREE PRIMER
KFP is a high quality, direct to metal chromate and isocyanate free high build primer surfacer that is formulated to provide excellent corrosion resistance and adhesion. When applied over properly prepared steel, galvanized, aluminum and fiberglass, 2K ISO-FREE PRIMER is easy to sand and topcoat with all current base coats. It can be used as a sealer and applied wet-on-wet when reduced with KR Reducer.
Mix ratio: 3 parts KFP Primer to 1 part KFP 306 Hardener as a high build surfacer.
As a sealer mix 3 parts KFP Primer to 1 part KFP 306 Hardener and 1 part KR Reducer.
2K High Build ISO-Free Primer Complete Kits
KUS KIT-KFP305-GL - 2K High Build ISO-Free Primer Gallon Kit
KUS KIT-KFP305-QT - 2K High Build ISO-Free Primer Quart Kit
2K High Build ISO-Free Primer Only
KUS KFP305-GL - 2K High Build ISO-Free Primer, Part A
KUS KFP305-QT - 2K High Build ISO-Free Primer, Part A
2K High Build
ISO-Free Hardener Only
KUS
KFP306-QT - 2K High Build ISO-Free Hardener, Part B
KUS KFP306-HP - 2K High Build ISO-Free Hardener, Part B
 Kustom Poly-Glaze
This high performance polyester finishing putty is a unique formula for final finishing over body filler, rust pits, pin holes, small holes, scratches, old painted surfaces, cured primed surfaces and topcoats. Poly-Glaze multi-surface finishing putty is ideal for metal and most flexible or rigid plastic parts. Poly-Glaze is flowable, spreads easily and is fast leveling. This tack free formula is ready to sand in 10 - 15 minutes. Mix Ratio: 50:1 Part KPG101 with KPG102 Blue Hardener. Poly-Glaze KPG101 is sold as a kit with enough KPG102 Hardener to activate the entire tube. Additional KPG102 Hardener is available and sold separately as necessary.
KUS KPG101 - Poly-Glaze Kit (24 Oz Tube of Poly-Glaze plus separate tube of hardener)
Additional Hardener:
KUS KPG102 - Poly-Glaze Hardener, Tube
 KE - Fisheye Eliminator
KUS KE215-HP - Fisheye Eliminator, Half Pint
Flow Enhancer/Universal Retarder (KE218)
KUS KE218-HP - Flow Enhancer/Universal
Retarder, Half Pint
|