Kustom Shop Primers:
Epoxy Primers: Primers, Sealers, Reducers...
KEP - DTM Epoxy Prime/Seal
An excellent corrosion resistant primer that offers optimum adhesion and superior hide to many types of properly prepared metal, aluminum, fiberglass and plastic filling materials. DTM Epoxy Prime / Seal, is easy to sand and topcoat with all current base coats. It can be used as a sealer and applied wet-on-wet when reduced with KR Reducers. DTM Epoxy Prime / Seal is chromate free.
Mix Ratio: 2 parts KEP Primer to 1 part KEP 502 Hardener.
KEP - DTM Epoxy Prime / Seal Complete Kits:
KUS KIT-KEP505
DTM Epoxy Primer Kits
(Gray) |
KUS KIT-KEP506DTM Epoxy Primer Kits
(Black) |
KUS KIT-KEP507DTM Epoxy Primer Kits
(White) |
KUS KIT-KEP508DTM Epoxy Primer Kits
(Red Oxide) |
|
|
KEP - DTM Epoxy Prime / Seal Only:
|
KUS KEP505
DTM Epoxy Prime / Seal,
Part A - (Gray) |
KUS KEP506DTM Epoxy Prime / Seal,
Part A - (Black) |
KUS KEP507DTM Epoxy Prime / Seal,
Part A - (White) |
KUS KEP508
DTM Epoxy Prime / Seal,
Part A - (Red Oxide) |
|
|
KEP - DTM Epoxy Prime / Seal Hardener Only:
|
KUS KEP502
DTM Epoxy Hardener, Part B
|
KUS KW901
Grease and Wax Remover
|
|
Kustom Shop Products, especially those which contain isocyanates are for professional use only and are not intended for sale to the general public. It is important that you read and understand the specific MSDS prior to purchasing or using any of our products.
Kustom Shop: Technical Datasheet
Kustom Shop: MSDS Index
|
|
Polyester Primers: KPP Polyester Primer Surfacer
KPP POLYESTER PRIMER SURFACER
KPP POLYESTER PRIMER SURFACER is a corrosion-resistant, sanding primer surfacer based on an air-drying polyester resin. The pigmentation is carefully balanced for optimum sanding properties. It is fast drying and has excellent filling properties and adhesion over fiberglass, metal, plastic and wood. Can be topcoated with all types of finishes, acrylics, lacquers, synthetic enamels and two-component urethane coatings.
All KPP Polyester Primers are sold as a kit that includes enough hardener for the container size that is purchased. Extra hardener is available and sold separately if needed.
KUS KPP105Polyester Primer Surfacer
(Gray) |
KUS KPP106Polyester Primer Surfacer
(Black) |
KUS KPP107Polyester Primer Surfacer
(Buff) |
KUS KPP108Polyester Primer Surfacer
(White) |
KUS KPP109Polyester Primer Surfacer
(Red Oxide) |
NEW! KUS KPP177
Polyester Primer Surfacer / Topcoat (Clear)
|
|
|
Kustom Poly-Glaze:
This high performance polyester finishing putty is a unique formula for final finishing over body filler, rust pits, pin holes, small holes, scratches, old painted surfaces, cured primed surfaces and topcoats. Poly-Glaze multi-surface finishing putty is ideal for metal and most flexible or rigid plastic parts. Poly-Glaze is flowable, spreads easily and is fast leveling. This tack free formula is ready to sand in 10 - 15 minutes.
Mix Ratio: 50:1 Part KPG101 with KPG102 Blue Hardener.
Poly-Glaze KPG101 is sold as a kit with enough KPG102 Hardener to activate the entire tube. Additional KPG102 Hardener is available and sold separately as necessary.
|
KUS KPH911
Extra Polyester Hardener
|
KUS KPG101 / KUS KPG102
Kustom Poly-Glaze Kit
|
|
|
|
Urethane Primers: 2K Urethane Primer
A high performance, high-build urethane primer surfacer that is chromate free.When applied over properly prepared steel, galvanized,aluminum and fiberglass, 2K URETHANE PRIMER provides excellent adhesion, corrosion resistance, and superior hide. 2K URETHANE PRIMER is easy to sand and topcoat with all current base coats. It can be used as a sealer and applied wet-on-wet when reduced with any KR Reducer.
Mix Ratio: 3 parts KUP primer to 1 part KUP 406 Hardener. (As a sealer mix 3 parts KUP primer to 1 part KUP 406 Hardener to 1 part KR Reducer.
KUS KIT-KUP405
2K Urethane Primer / Seal Complete Kits
|
KUS KUP405
2K Urethane Primer / Seal Only
|
KUS KUP406
2K Urethane Hardener Only
|
|
High Build Primers: 2K High Build Iso-Free Primer
2K High Build Iso-Free Primer
KFP is a high quality, direct to metal chromate and isocyanate free high build primer surfacer that is formulated to provide excellent corrosion resistance and adhesion. When applied over properly prepared steel, galvanized, aluminum and fiberglass, 2K ISO-FREEPRIMER is easy to sand and topcoat with all current base coats. It can be used as a sealer and applied wet-on-wet when reduced with KR Reducer.
Mix ratio: 3 parts KFP Primer to 1 part KFP 306 Hardener as a high build surfacer. As a sealer mix 3 parts KFP Primer to 1 part KFP 306 Hardener and 1 part KR Reducer.
KUS KIT-KFP305
2K High Build ISO-Free Primer Complete Kits
|
KUS KFP305
2K High Build ISO-Free Primer Only
|
KUS KFP306
2K High Build ISO-Free Hardener Only
|
|
Lacquer Primers: Old-School Lacquer Speed Prime
Old-School Lacquer Speed Prime
Quick-Dry Primer Surfacer is a single-component, low VOC lacquer primer. This premium primer offers maximum high build and adhesion properties. Old-School Lacquer Speed Prime is also corrosion-resistant, and may be wet or dry sanded. Recommended under acrylic enamels, synthetic enamels, acrylic lacquers.
Kustom Shop: Technical Datasheet
Kustom Shop: MSDS Index
|
KUS KIT-KL611
Old-School Lacquer Speed Prime Kit
|
|
KUS KL611
Old-School Lacquer Speed Prime
|
|
|
Lacquer Thinner:
|
|
RSP LT70
ACRYLIC LACQUER MEDIUM THINNER
|
|
RSP LT85
ACRYLIC LACQUER SLOW THINNER
|
|
|
Solvent & Cleaner:
|
KUS KT-025-GL
Compliant Solvent and
Kleaner |
|
Kustom Shop Reducers:
KUS KR60 / KUS XR60
Fast Urethane Reducer
|
KUS KR70 / KUS XR70
Medium Urethane Reducer
|
KUS KR85 / KUS XR85Slow Urethane Reducer
|
|
Flow Enhancer/Universal Retarder (KE218):
|
KUS KE218 - Flow Enhancer / Universal Retarder
|
KUS KE216
Urethane Accelerator
|
KUS KW901
Grease and Wax Remover
|
|
Kustom Shop Products, especially those which contain isocyanates are for professional use only and are not intended for sale to the general public. It is important that you read and understand the specific MSDS prior to purchasing or using any of our products.
Kustom Shop: Technical Datasheet
Kustom Shop: MSDS Index
|