KEP - DTM Epoxy Prime/Seal
An excellent corrosion resistant primer that offers optimum adhesion and superior hide to many types of properly prepared metal, aluminum, fiberglass and plastic filling materials. DTM Epoxy Prime / Seal, is easy to sand and topcoat with all current base coats. It can be used as a sealer and applied wet-on-wet when reduced with KR Reducers. DTM Epoxy Prime / Seal is chromate free.
Mix Ratio: 2 parts KEP Primer to 1 part KEP 502 Hardener.
Custom Shop Products, especially those which contain isocyanates are for professional use only and are not intended for sale to the general public. It is important that you read and understand the specific MSDS prior to purchasing or using any of our products.
Custom Shop: Technical Datasheet
Custom Shop: MSDS Index
This high performance polyester finishing putty is a unique formula for final finishing over body filler, rust pits, pin holes, small holes, scratches, old painted surfaces, cured primed surfaces and topcoats. Poly-Glaze multi-surface finishing putty is ideal for metal and most flexible or rigid plastic parts. Poly-Glaze is flowable, spreads easily and is fast leveling. This tack free formula is ready to sand in 10 - 15 minutes.
Mix Ratio: 50:1 Part KPG101 with KPG102 Blue Hardener.
Poly-Glaze KPG101 is sold as a kit with enough KPG102 Hardener to activate the entire tube. Additional KPG102 Hardener is available and sold separately as necessary.
Poly Hardener MSDS (PDF document)