Headlight Lens Renew Kit 3M 39014
Help improve your visibility on the road by restoring your headlights. Kit includes sanding discs and polishing pad with compound; meant for use with a household drill (sold separately) • Refines and reduces scratches. The Rubbing Compound and foam pad will remove fine scratchs on the headlight.

Kit Includes: 1 - Disk Pad Holder 6 - 3M Sanding Disk 4 - 3m Finishing Discs 1 - 3M Trizact Disk 1 - 3M Rubbing Compound 1 Ounce 1 - Buffing Pad 1 - Small Roll of Automotive Masking Tape

Click to View Related Items

Headlight Lens Restoration Kit 3M 39008
Plastic lenses can yellow with age, reducing headlight brightness, and new lenses can be expensive. The 3M™ Headlight Lens Restoration System lets you shine and restore plastic lenses, including headlights, taillights, fog and directional lights. Now you can produce professional results with the 3M™ Headlight Lens Restoration System and a household drill (1200-1600 rpm).

Click to View Related Items

Headlight Lens Restoration Kit 3M 39084
A five step process that restores the clarity of yellowed, hazy, or dull headlight lenses. 6 sanding discs • 4 finishing discs • 2 refining disc • 2-1 oz rubbing compound • 1 foam pad

Click to View Related Items

Paint Restoration System 3M 39053
Comes with 3M Scratch Remover Plus, 3M Shine Restorer, and 3M(TM) Synthetic Wax Protectant: Kit includes a patented 3M Scratch Eraser Pad plus all of the necessary foam pads Includes simple step-by-step instructions

Click to View Related Items

Provides a superior cut while leaving a fine swirl mark finish on all modern paint systems! This new formulation will remove P1200 and finer sand scratches while providing excellent handling characteristics with easy clean up.

Click to View Related Items

Many painters mix more paint than they need to reduce the chance of starving the gun. PPS™ allows painter’s to spray at any angle without starving the paint gun. Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. Graduated measurement to 20.3 oz/600 mL (with mix ratio film insert). Maximum capacity of 25 oz/750 mL when filled to within 1/8 inch of rim. For use with part number 16001.

Click to View Related Items

• Prep gel that is designed to clean, degrease and abrade automotive surfaces prior to painting
• Used in conjunction with Scotch-Brite hand pads, the Scuff-It gel lubricates the pad to ensure a consistent scratch pattern that will greatly improve the adhesion of the paint
• Rinses cleanly with water
• Convenient "wedge" tube fits into technician's pocket for easy use

Click to View Related Items

Scotch-Brite non-woven abrasive is 4-3/4 in x 15 ft roll perforated into 4-3/4 in x 6 in pads. Most aggressive of the 3 part scuff pad system. Used to scuff prior to primer for proper mechanical adhesion.

Click to View Related Items

Use the 3M™ Windshield Repair Kit to minimize the appearance less than one inch in diameter of small bulls-eyes, spider web cracks, and star damage on windshields.

Click to View Related Items

Use the 3M™ Synthetic Wax Protectant as part of the 3M™ Paint Restoration System to protect your paint from the elements.

Click to View Related Items

A manual applicator gun designed for use with 3M's 1:1 50mL and 2:1 37.5mL cartridges.

Click to View Related Items

Will not harm most thoroughly cured automotive paint, vinyl or fabrics when properly used. Part numbers 08984 and 08986 have a VOC content of 816 grams per liter (6.8 lbs per gallon). Composite Partial Pressure equals 4.81 mmHg. Local air quality regulations may regulate or prohibit the use of surface preparation and cleanup materials based on VOC content. Consult your local air quality regulations. * Not available in California due to regulations.

Ships from Duncan SC

Click to View Related Items